Tacoma - OVTUNE - VFTUNER - Update Info and Original Development

The "catted downpipe" is an OVTune product, not the stock exhaust.

 

How can I find out which tune I currently have flashed on my Tacoma? I attempted to use the identity option but I didn’t really see any of the info I was looking for.

 

you can’t

only good way is looking at the logs from the flashing utility and see what the last time you flashed one. No sure if that is in p5flash tho

 

Roger that thanks

 

Apologies in advance if I missed this somewhere. The 2020 AT tune. Is that Tune specific for the new 2020 models? Or can it be use on 2017 04b04 trucks?

 

Each tune is specific to the ECU it's been released for, so the answer is no, you can't flash a 2017 truck with a 2020 truck tune.

 

You can try, but it won't work.
Like dpippel said, you can only flash the tune that matches your ecu id.

 

If you have an obd app like obd fusion you can use that. You could also go to an auto parts store and use one of their readers I'm sure.

 

... how do you not know what tune you are running?

 

Just flashed beta 2.0 on my '18 AT. I noticed that the throttle response has been smoothed out quite a bit from 1.05. I normally drive with ECT on, and learned to drive it with a lighter pedal. Driving it in stop and go traffic makes me feel like I'm learning how to drive stick all over again, jerking back and forth. I'm anxious to give it a try in the morning to see how it really feels under real life conditions.

 

Most likely your in “Gear Lock” mode if you have ECT on with the 2.0 Beta tune

 

I was on 1.05 91 performance. I never flashed the 1.05 gearlock. I haven't tried ECT with 2.0 yet.

 

Ah I must have miss read your original post. Carry on I’m on Island Time

 

I wouldn’t do that if I were you...

one time this one guy... yeah... RIP

 

Just drive for at least 1k, then summarize your opinion.

 

mods are sleeping?

 

that worked well the last time

 

Sunday I purchased a Flash Kit. I am trying to register my software (latest version 1.3.0). I installed the x64 version. It won't do anything when I hit "P5Flash Utility". After closing the program and reopening it, "P5Flash Utility" is grayed out and won't work. I used Add/Remove and removed the program. Then I installed the x86 version. Same issue. So it won't allow me to retrieve my System ID. My order has not shipped yet, but I am trying to get a jump on this. Any help would be much appreciated.

 

Have you "Updated" from the Help tab and turned off windows virus and threat protection? P5 Flash Utility only works for me when virus and threat protection is turned off. GL! (windows security, virus and threat protection, virus and threat protection settings, manage settings, real-time threat protection, Off)