Sealed Ball Joint Greasing?

"If it ain't broke, fix it till it is"...

 

Thanks. It was a great find with a 4in lift, new rims and 35s mounted

I slid them bolts up, just had to move fender liner with crowbar and not pinch wireloom to slide it past.

 

there we go

 

Better break out the heavy artillery.

I recently did this using a 5 HP, 5.8 CFM, 20 gallon air compressor and 700 foot pound impact wrench.

It took awhile but I was also using 125' of 20 year old air hose. 10' cheater bar on a heavy duty breaker bar would be next best.

 

I don't see how a cut off disc would help. But i like the way you think

 

Well funny story. 14 years of rust really makes for a fun time removing cam bolts

 

Oh, I thought we were talking specifically about the LBJ. I had to cut off my UCA through bolt as well as two LCA cam bolts. Same deal.

 

I did my UCA and struts with hand tools.

didnt touch the cam bolts but shop had no issue adjusting them

the sway bar links got a zizz wheel to them allen bolt end things

 

Yep. Great quote, this is going in my signature btw...

 

I read that it takes up to 5 tons of pressure to push it out lol

 

First one to come up with a Mobile Hydraulic press for this exact application will get rich quick.