ATX Mojave?

Will these fit my 1998 4x4? In the description it says they have 5.25" of backspacing. I dont know much about wheels backspacing and what amount is best and stuff like that. Thanks!

ATX Series Mojave AX9816 Teflon Coated Wheel (15x8"/6x5.5")

http://www.amazon.com/American-Raci..._2?s=automotive&ie=UTF8&qid=1285652088&sr=1-2

 

Thats quite a bit of backspacing. I think they're just completely messed up though.

The real part number for the Mojave starts with AX398 and all have around 4.5" backspacing in 16" wheels. I believe the AX39816883 would be the one you want with the larger hub hole. Not sure if you wanted to go to a 15" wheel or not, but if thats the case, that would be AX39815883 for the part number with 3.75" backspacing.

http://www.americanracing.com/browse_atx.asp

Wheelers is selling some Procomp wheels that have a similar design that is considerably cheaper.
Alloy: Steel:

 

Thanks man, that reply had all the info i needed! And i like those Pro Comp wheels, but i like the flat black look, but if i cant find a set of used Mojaves for cheap I am gonna go with the Pro Comps.

 

Btw your truck is awesome! Maybe im wrong but in your sig, i didnt see that anything is done to your rear suspenion, what are your plans for it?

 

I just have some spacers on it now that the previous owner put on. Nothing too fantastic. When/if my springs start to wear, I'll replace them with something with the same amount of lift (about 2").

As far as shocks go, the previous owner put on some kyb gas busters, which seem to be holding up well. I do have some Billy's sitting next to me that I'll eventually put on.

 

Sounds good man, if you go with an aftermarket pack i know the deaver J59 gives about 2" of lift. I have them and am very pleased.