Velcro interior?

I have been wanting to do the entire ceiling in Velcro. I have a lot of patches and I want to have them more secure. The way I have them now is weak and the ceiling is not fuzzy type fabric. Is it possible to change the ceiling to a Velcro material? What would be involved? Thanks guys!

 

Ashesive velcro sheets? Stick the fuzzy side to the roof

 

I would but I pitched the fuzzy sides of all of them (which I now regret) and then I thought what if I could do a fuzzy Velcro sheet but I want it to look less cheesy than that, which made me think of redoing the ceiling cloth interior. Though may be a big job.

 

Does your hair stick to the velcro? That would be my worry since me head almost touches the roof in the drivers seat.

 

Just hot glue them up there.

 

An upholstery shop could put something together for you.

 

its a pain, the velco sheets are too thick i ended up only doing the rear half of the truck, you would be surprised how contoured the ceiling is, i used

Gourd Black Woven Loop Material, Wide Loop Fabric 28" x 48"

https://www.amazon.com/gp/product/B07FM967F2/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1 and

Bed N' Basics Upholstery Twisty Pins with Clear Heads - 100 Pack - Holds Bedskirts, Slip Covers, Drapes and Other Fabric and Materials Securely in Place - for Sewing and Home Decor

https://www.amazon.com/gp/product/B072K5XLPK/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 for install. otherwise you have to pull the headliner and have another material installed, and i found through searching you have to remove the windshield to pull the headliner.

 

I got patch mats and used t-pins to hold them on the ceiling. It’s not the cleanest look but with all the patches, you can’t tell.

 

Some might think its too late to fret over that....

 

I use 1.5" pins in the corners of the patches. Holds great and can be removed later.

 

Velcro tabs would probably work too. I normally heat up the adhesive with a lighter real quick and they seem to stick to everything

https://www.amazon.com/s?k=velcro+tabs&ref=nb_sb_noss_2

 

Wow, that is alot of patches!

 

Haha, I’ve been thinking about this for quite awhile. My plan is to wait for @MESO to do the sunroof Molle rack, then do Velcro on part of it.

 

Thats actually not bad. Thanks. So you pin up the ends of the sheet and call it good eh?

 

Haha, thanks man. Girlfriend's has got the house, leaving my truck the only place to customise things