South Carolina BS thread under new MANAGEMENT and lives in SC

Solid Sunday funday!

 

I’m heading to Pittsburgh in a few days. Need me to pick you up some

 

Let me see a pop shove it

 

Damn very nice, just had some Blantons myself along with a variety of Ipas. Solid Sunday fundays For sure.

 

If you were closer to me, I’d get you to grab some Iron City.

 

I cant remember the exact model of racing wheel that I had when Gran Tourismo 5 came out. I know it had force feedback, full 6 speed shift lever (flapper paddles behind the wheel too) as well as a full clutch/gas/brake pedal setup. I clamped it to a shitty folding table and ghetto rigged up a system with a computer chair that made it feel more natural to play. I cant remember how many hours/miles I wasted playing that game. I think it was something like Logitech G29 but it was like the model from 8 or 10 years ago.

Yeah, I'm the same way. I don't need a Smart TV since my peripherals are connected to the internet (PS4). Everything is routed through my receiver so the only input going to the TV is an HDMI cable. Typically, you can find the same model TV marked down because it has less HDMI ports on the back and isn't considered a "Smart TV" for somewhere in the ballpark of 150 to 400$ cheaper. Granted that was when I was looking years ago at upgrading my old TV. Though, those TV's at Costco are tickling my short hairs but it's damn near impossible to find a "dumb" TV nowadays. Do I really want to take out a second mortgage on the home for an 82" TV like the Samsung 82" 4K UHD LED LCD TV? Ill keep looking.

-J

 

This Marlin Crawler kit is beefy

 

Installing my drivers side LCA, greasable cam bolt, and passenger side spindle Wednesday. Truck drives straight and mid travel suspension is super smooth. Waiting to save up some cash and debating AllPro expo leafpacks or airbags to keep the back from sagging for next project. What you guys think? Also, anybody know a local place that will install used tires? Getting a set of 275/70r18’s free

 

Happy Birthday @Cozza

 

Thanks for the offer. I dunno when I would be able to get them off your hands.

 

Thanks man!

 

Greasable cam bolt

I'd go deaver, blackout14 leafs, or dobinsons before I bought allpoo leafs unless you get a good deal on used ones

 

Happy birthday @Cozza ! Hope it's a good one!

 

Wanna sell em?

 

Replaced my passenger side LCA and cam bolt already. Being able to grease them through a zerk fitting will hopefully make them not seize again.

 

Need links to this

 

Thanks for the suggestion. Staying away from dakars as I want to avoid the “W” shaped leaf issues

 

Stand by 1

 

https://www.rockauto.com/en/catalog/toyota,2007,tacoma,4.0l+v6,1434686,suspension,alignment+caster+/+camber+cam+bolt+kit,13512

Was able to knock my factory cam bolt loose and save it as a trail spare.

 

Blackout HD 4+1 set is the way I would go unless you run a LOT of weight in the rear. I did the 5+1 set and it was too much height in the rear, even with OME 886's and 5100's set at 0 in the front. But the pack is super stout and not squeaky at all. I ended up pulling the overload leaf to level the truck out a bit and lose some rake until I can lift the front higher.