Lifting tacoma

I have a sr 4x4 dcsb. I got some wheels and tires for it. I decided to go with lvl 8 mk6. Its a 16x8.5 wrapped around a bfg ko2 265/70/16. No rubbing issues at full lock on stock suspension. Im ready to lift the truck but idk how much lift i want with the size tire i have.

 

Yeah me neither

 

Do some reading, compare other builds, spend some time. Then ask the question.

 

With a 265/70/16 I would recommend a 1” to 1.5” level/lift. If you go much taller you’ll be looking for bigger tires. So many decisions.......

 

What is the offsett of the wheels, you may not need to lift at all

 

Offset is -10 degrees. Theres a bit of poke

 

Im surprised you arent rubbing right now. Must be a tight fit
Are you looking for looks or performance in a lift? And are you looking at under $1000 or $2000?

 

I thought so too but i still have an inch from the wheel the fender wells. And im mainly going for looks.

 

If you are going for looks, you can get spacer lifts for cheap...depending on who is doing the labour, maybe $500

 

This thread may shed some light on your question:

What you need to know about lifting a 2016 Tacoma - Presented by Toytec Lifts

 

Least headaches is 1-2" of lift.

I'm at 1.5" at the front,
with a a comparable tire size.
and am at 36" ground to fenderwell all round.

 

no such thing.

 

-10 mm.

 

Kudos for admitting that. IMHO 1” isn’t enough room to when going off-road or pushing it a little more.

 

I saw a lifted 17 with 265/70/16 near my house.

I thought it looked pretty weird. Bigger tires are needed.