Genesis Offroad G Screen mount location

Any of you folks installed the Genesis dual battery system to your TRD Off Road?
If so, where is the best and easiest location for mounting the G Screen monitoring feature button?

 

I don't know if it's the best. But, I was abe to get it mounted left of the steering wheel. I will put together a full write up shortly, and tag you if you think this might be an option for you.
But, here is a picture showing the results.
Note, that is an insert for aftermarket switches where the cubby used to be. So if you still have the cubby, this may still work for you. I say may, because I had to dremel away one of the screw bosses on the back side of the panel that holds the cubby in place.

 

Where did you get this panel? I want to get one.

 

It has been quite a while since I got it. But I think it I got it from Online components when I ordered the rotary switches. https://www.onlinecomponents.com/en/carling-technologies/vm301-44819826.html
I will have to go back and check my install pictures when I get home, to be sure. There is a better picture on the Newark website. https://www.newark.com/carling-tech...aid||&CMP=KNC-GUSA-GEN-PMAX-LOW-ROAS-Shopping

 

I went back through my install pictures and checked some information I kept around. It looks like it is the Carling brand insert. But, I got it from OTR High quality OTRATTW switch holders. when I originally bought the rocker switches, I was intending to use there. They also have blanks and gaskets. High quality OTRATTW switch holders.
Going back through the install pics from the G-screen, it looks like I had to do a bit of trimming in the cubby opening to get the switch holder to go in. I don't remember, but, it may even be a friction fit based on the pictures I have of the area. So trim, trial fit, repeat.