Tacos in St. Louis area

Or don't Bob it.

 

I have Bilstein 6112s with a 650 spring. Marie at Headstrong said Bilstein makes a 700 lb but recommends it be used with 8112s. Bought a Smitty 10k winch with rope, haven’t installed it yet so can’t vouch for ride quality. Noticed a little rust on the rear Bilstein 5160s, which are zinc coated, so shouldn’t rust this fast, 5 months old. Grr. Otherwise added approximately 485lbs with bumpers, sliders, skids (Al), beefier struts, leafs, UCAs, bigger tires. Only difference I noticed in performance is the new tires. Wranglers would roll as soon as clutch engaged, have to goose the accelerator to roll the Falkens. Still to come is the winch, massive Exide dual AGM battery, fuel tank skid for another 140 lbs. Overall ride quality is better than stock, not as stiff. Picture is not Old Man Emu, rather Old Man Me.

 

More truck mods

 

He just prefers a high surface area for deer impact.

 

I have that first patch

 

Looks good. I didn't get the HD spring for my 6112s either. Noticed a slight drop in the front end after putting the C4 hybrid bumper on, with the winch and everything. Will measure to see how much it sagged but am sitting well over 500 lbs and riding fine.

Btw @HIYota... brah, I averaged 16.3 mpg all the way down here lol.

 

Wait a few months and when u start to off road, the coils will get some real work

 

That's better than I would get lol. I'm normally around 13-14. If only Toyota had made the 6th gear on the manuals longer.

 

If you are still trying to decide what to get me...

 

That’s super cool.

I’ll take one too

 

But .... I already got you a present...

 

I spy no battery.

 

2Fang sunday went well yesterday, OME 887 springs and some SPC arms on Josh's truck.
Was interesting to work on a truck again....instead of the house......
@Slashaar

https://www.tacomaworld.com/threads...rail-limo-and-bs.536799/page-22#post-22300667

 

Shut up

 

Next time