Replace 5VZ-FE with.....

I always read your replies in your voice haha

 

Hey Tyler, you should come to our next Subscriber Party, most likely this June. Maybe you have attended one of our parties before in the past but I don't remember. We do a video invite usually at least one month before the party date. We use to hold multiple parties every year but I decided one party in the Summer is enough now. People will either make it or they won't. I'm hoping by just having one party for the year it will inspire people to get off their arses and make it. For some of our past parties, a high percentage of the people who signed up, ended up attending. Other parties, we had a significant percentage bail out at the last minute and then we had a crap load of food left over. Our last party was like that and I ended up bringing most of the leftovers to a local fire station. To say the least, they were stoked.

 

im having problems with my tune for my supercharger now that my jba headers are on

 

do it yourself for under 5k

 

Yes. Could use some more membership in the club.

 

Just bite the bullet and drop in an LS. You can find them anywhere. Or if you want a cheaper and easier route drop in a 2UZ

 

I guess it all depends on your experience but after documenting what was entailed with doing a 2UZ Swap for a 3rd Gen 4runner which would be the same for a 1st Gen Tacoma, this is by no means a project that most DIYers could easily pull off and do right. The research and building of the wiring harness alone my buddy Mikey did was very extensive.

 

The wiring harness scares so many With the correct EWD`s it is just long and tedious something best done in peace and quiet

 

When the time comes, I’ll probably go back with a 5VZ-FE with SC, 2.2” pulley, high volume fuel pump, DT headers, 7th injector.

 

Why wait, do it now..

 

$$$$$

 

I agree this isn’t a DIY thing, it should be done professionally