What Have You Done To Your 2nd Gen Tacoma Today?

Looks real good! Where does one find the black interior panels on the steering wheel and sides of the radio?

 

I like that a lot. How did you wrap that emblem in the steering wheel?

 

Not sure what happen to the AZBS thread but swapped out my oe cv axles couples months ago do to torn boots and my napa replacements already took a shit so here I am learning how to rebuild my oe cv axles

 

Soooo clean

 

Got called on by the Neighborhood Watch!

My daughter was feeling rough and loves sleeping in the Tacoma. I'm definitely glad they called it in ha!

 

Not a pdf
https://youtu.be/l294Pie2mLY

 

Removed roof rack. Gonna build some type of bed rack for the kayak.

 

Got a “new to me” camper over Christmas. Looks exactly like this: https://www.motorsportsland.com/inv/2017-Tg-Max-XL-4001-S-State-Street-33415/#top DW picked one up garage kept, hardly used for $4600. Contacted NuCamp and I’m going to turn it into a Boondock lite edition for about $800. NuCamp won’t ship direct to me, so have to go with an authorized dealer. Waiting on their response....


Got the Bullet to replace my sharkfin: https://www.tacomaworld.com/threads...ark-fin-delete-2nd-gen-only-currently.625966/
So I can install my prinsu

 

Check this out:

https://www.tacomaworld.com/threads/feeler-interest-gauge-for-12-15-blackout-interior-parts.449999/

Rick

 

Worked on my tacoma for about 3 hours today doing paint corrections and waxing. A lot of work but always so satisfying

 

Thank you sir! It's a bit dirtier today driving through the metropolitan and a few job sites....

 

You need the 3M film obviously, slap it on, some heat from heat gun, a LOT of OCD attention to detail, take your time, work the vinyl in really good using heat, and CAREFULLY trim the excess off with a very sharp X-acto knife.

This will give you an idea what I’m talking about:
https://www.youtube.com/watch?v=ES60y2tmixI

Rick

 

Nice color combo! I always like black with gold or bronze wheels.

 

Thank you!

 

Just got this pre-runner two weeks ago, got rid of the stock wheels and installed a set of Sequoia wheels that I have run on my 05 Tundra for the last several years. Also installed a bug deflector. Full leather interior next.

 

Changed out the defective resistor to the HVAC blower.
It was WAY over due!

 

Ty!

 

Darn Slovenians!

Sorry, it's a Czech thing. Glad you got that repaired.

 

I did mine and it worked for 3 days. Found out my whole ac control panel is going to have to be replaced. I still have no high.

 

Since it's from down under it's written upside down...