Rear Locker Switch

Hello,

I am getting a the front E locker installed, and what to switch the Rear Locker switch to a Otrattw Switch. I am trying to figure out how to rewrite it. There is 4 wires coming onto the rear locker switch, which means 12volt supply, ground, illumination, and one trigger wire. if anyone has any wire diagrams or has done this already I would greatly appreciate the help.

 

http://www.lowrangeoffroad.com/toyota-e-locker-switches.html
Look at the wiring diagrams on that page.

 

thank you

 

Those 4 wires go into an ecu for the locker. So it's not as simple as you think.

 

So I traced the wires from the swith to ecm and only one wire went to the ecm

 

Your going to keep the ecm or eliminate it?

 

I have the grey wire mod done so I technically buy passing the ecm already.

 

That doesn't bypass the ecm. It just tricks it. If your wanting to change the switch just for looks. It's just a matter of no power or power to the ecm from the switch. As you can see in the attached wiring diagram.

 

Thank you will look at the wire diagram