(SOLD OUT) Discounted Price on TRD Pro Suspension Kit

Except that the kits are not made anymore,so your point is mute.

 

Have you seen this https://www.tacomaworld.com/threads/fs-2015-trd-pro-shocks.573360/

 

I like mine for the sale price I paid a lot. I got the kit, new take off TSB spring and an add a leaf and installed it all myself for around $1100 CAD. ($850 USD)

But when they wear out in a few years it's Kings and Dakars all day long.

 

There you go Stage 2. ^

 

I have. From what I understand it’s not the full kit, just the shocks. The fact that it was leaking when new was concerning as well.

 

The kits aren’t made but the individual parts are which is why I was asking my original question if anyone had a part number list for the individual components.

 

That's all the Pro "kit" was; front & rear shocks and a rear brake line spacer. The front shocks came pre-assembled, and rear shocks came with reservoir mounts.

There's no special swaybar, leaf springs, control arms or anything like that in the Pro suspension. The Baja kit did come with shorter front bumpstops, but they're just 2wd/5-lug standard issue bumpstops. Pro "kits" didn't even get different bumpstops.


I love my Pro kit, but if it wasn't for Toyota clearance sale I would've bought the non-TRD branded 6112/5160.

Good luck in your searching.

 

P/N list is included in the installation instructions; available for free online from Toyota. There's links to that all over the place (including in this very thread), assuming your Google-Fu isn't weak.

 

The price was the only reason I got the Pro kit. Plus I was able to get a 3 leaf progressive pack new in box for only $100.00. With all that savings the hit I took replacing LCA bushings didn't feel so bad.

 

Here's one that went up for sale not too long ago:
https://www.tacomaworld.com/threads/2015-trd-pro-suspension-kit-ptr13-35150-nib.620473/

 

Much appreciated!

 

I have a set of Baja's im interested In selling

 

I have a gently used set for sale

 

Well that didn’t last long... back on the hunt.

 

Yea that was the best price I've seen in a while. There's another that's going for like $1k that's been around a while.

https://www.tacomaworld.com/threads/fs-2015-trd-pro-shocks.573360/

 

Its a $1000.00 right now which is cheap,for a kit considering some guys pay $4000.00 on up for Fox or Kings.If someone wanted a kit as bad as Stage2 says he wants one,you would think they would grab it.

 

If it was a complete kit and undamaged I would, but I’ve played the broken part game before and I’m not interested in doing it again.

 

Going to get my alignment done soon. What numbers should I be aiming for with caster with this kit? Right now I'm on 265/70r16 and plan on bumping up to 265/75r16. Would OEM specs be fine?

 

Aim for 2-2.5. I told the tech as high as possible while keeping camber close to spec

 

Thanks all, getting my alingment done this week.

What are you all doing to combat taco lean with these kits? When I installed it I had my OEM leafs and everything was perfectly level. I just recently switched to Deaver U402 from Dakars and both had about 0.75" of taco lean with a full tank. Should I run a 1/4" spacer up front or a 0.5" block above my rear axle even though the TRD Pro suspension is supposed to accommodate for this?