3rd Gen Magnetic Gray Thread

Bilstein 5100

OME887 springs

SPC uca

HS 3 leaf AAL

HS 1/4” taco lean spacer

265/75/16 Wildpeak AT3W

 

EXACTLY the parts I have on my order list.

A few questions:

1. Did you have to trim any plastic in the front?
2. Any issues with the TSS? Ive been reading that some people have issues with that after lifting 3" or so. I don't want to mess anything up warranty wise (other than the obvious parts from lifting it)
3. What gas mileage are you getting?
4. UCA necessary? Or did you do that to avoid having to do it later on down the road?

Thanks a million!!


Edit: Going with 265/70/17 with the Fuel Vector in a 17x8.5 -6mm offset.
Tire size is about the same as you, just a bigger wheel.

 

my tires rubbed the front air dam only when cornering very sharp with the steering at full lock (doing donuts). I wasn’t rubbing the cab mounts until I put on 1.25” wheel spacers making my wheels sit at -30something, so I cou a can mount chop.
Mine is a 2017 so no tss.
I heard 3” of lift require uca’s, but some have gotten away with out them, but I didn’t want to take that chance.
Im currently getting between 17.5 & 19 mpg around town. Highway mpg is about the same.

 

'20 MGM 6MT

 

Any issues with TSS when lifted?

 

Any issues with the TSS system before changing grille? I have a TRD sport with OEM grill and about to do a 3” lift. The only thing holding me back is the concern of TSS issues

 

Any issues with TSS after lifting? Going with a 2.5-3” lift but hesitant to pull the trigger after seeing people talk about TSS issues.

 

Nope, not a single issue

 

awesome. What made you go with 888 vs 887? I can't seem to decide which ones to go with. I would rather be level or have a rake ≤ factory rake. I was going to get 265/70/17 tires but I may go bigger. You have any trimming with you 285s? Also looking at going ahead and putting on spc UCAs while everything is apart. I also read where someone with Fuel Vectors had an issue with them being lug centric vs hub centric? You running spacers?

Thanks for the info!!

 

No issues so far

 

Finally got around to installing the prinsu rack and love the look. Can’t wait to get some cases mounted up there

 

Truck looks great! What percent tint do you have and what vent visors are those?

 

Thanks! I did 35 on the fronts and 55 over the stock tint on the rears. I wanted to keep the fronts lighter than the rears, but reduce the difference between the fronts and the rears while making all of the windows darker. I've been really happy with how it came out.

The vent visors are by AVS, the non low-profile version

$60 Auto Ventshade [AVS] In-Channel Rain Guards For 2016 - 2023 Toyota Tacoma DOUBLE/EXT CAB ONLY | Window Vent Visors, 4 pcs. - Smoke | 194768

https://www.amazon.com/Auto-Ventshade-194768-Ventvisor-Deflector/dp/B018AIGLSI/ref=sr_1_7

 

What black grill is that? I've been debating on putting a black grill on this color.

 

it's the TRD pro grill with the TSS sensor garnish

 

That grill is a pro grill w raptor lights, highly recommend getting it from running4tacos, they got solid black and other options on color Toyota lettering color.

 

Roof racks are growing on me. was it a difficult install?

 

Are your wheels "hub-centric" or "lug-centric?" I've read some harsh things about lug centric and can't tell what wheels are when looking at them. I have been close to buying the Fuel Vectors.

 

I have method nv’s (like everyone else lol). They are hub centric. My spidertrax spacers are also hub centric.
You can also buy hub centric rings if you find the wheels you like and they happen to be lug centric.

 

Your truck looks great! How do I verify that the wheels I am looking at are hub centric? It doesn’t seem like that’s a description they give in the wheel info.