What Have You Done To Your 3rd Gen Today?

Spotted this sweet quicksand "sport" and had to take a pic. But It didn't have a scoop so I was confused....lol.

 

The best color! But then again i am biased.

 

hahahahaha classic

 

Cut the factory horn plugs off and use friction type connectors? Any change to the fuse? Getting ready to do mine.

 

Fourth unopened box of truck parts since Christmas came today! I officially have a mod pile now!!!!

 

Sorry for being such a Noob, but what is this for?

 

Your taco looks good

 

No - don't cut anything - it's plug and play. The ONLY thing I did was run a ground return wire for each. They plug right in. And bolt right up to the stock location.

Maybe in the future I will put one on the right side of the truck. There is a threades hole over there (but not symmetrical)

 

Flashed the ECU to the TSB 0062-18 calibration...

 

What do they sound like? The on-line sound samples I've listened to were not impressive.

What model do you have?

 

I put a new sticker on my truck...

 

I upgraded the tweeters with the Subaru speakers listed here: https://www.tacomaworld.com/threads/how-to-subaru-toyota-3rd-gen-tweeter-upgrade-holy-s.540548/

It sounds amazing!

Except I lost a piece. Dunno what it was, but I just heard it fall through the dash, when I pulled the passenger side panel off... Anyone have an exploded parts view I can look for what it was?

Here's a pic of the panel. I think this is the part that's missing...

 

General Electric 29898 GE Wireless Motion-Activated LED, Battery-Operated, Adjustable Positioning Task Light, 1, Black

https://www.amazon.com/GE-29898-Wireless-Motion-Activated-Light/dp/B07TT87K4Q

Found this GE LED battery powered light on Amazon for $16’ish.

Comes with Velcro or screws for mounting. Uses 3 AAs, swivels, and can be On, Off, or Motion Detecting.

I was interested in the motion detection to see if it would come on when I lower the tailgate or open the tonneau. It does... happy so far. (In motion detect mode it only comes on if it’s dark enough, which is good for battery life.)

I don’t think it’s as bright as something like the OEM bed lights, but I think it will be just fine with two of them, and being able to aim them is great.

Will probably buy another for the drivers side now that I know.

Cheers.

 

$39 HELLA 003399801 Supertone 12V High Tone/Low Tone Twin Horn Kit with Red Protective Grill, 2 Horns

https://smile.amazon.com/gp/product/B000CRZXPI/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

They sound more refined and louder than stock. The high one- 500hz sounds a bit tinny and euro by itself but together they sound decent. Not bad for the price but they are not going to cause a seismic event.

 

If you have auto headlights then there is a sensor that goes there, but it doesnt look like you lost the sensor as the part there should be a smoked clear not solid. Chances are you dropped a clip or something.

If you open the passenger door, you can remove the side part of the dash off and look behind there for anything.

 

Yes it comes ready wired, just pop the tail lights out and it’s there

 

It’s alright sir. Bed lights, 2020

 

I sure do. Will post soon

 

Ehhh, bought em for $ 89ish with tax and shipping

 

Oweee.... can I see em installed?