Eibach pro lift kit

Happy New Year!

 

if i'm looking for a ~2 inch lift, would I want to set the clip at lowest setting?

 

Yes, lowest setting will give you 2” of lift unless you have added weight up front, like an aftermarket bumper/winch.

 

It’s been 16 pages since we were told not to use the sway bar relocation kit. Install is Monday for me and wanted to actually make sure this solved the issue. Has anyone since installed this without the relocation kit? Did that actually solve the issue?

 

I did not use the relocation kit. When I ordered my setup from toytec he said it was not needed and I have had no issue.

 

I did need the relocation kit as when we installed without it at first, there was contact. It seems as through everyone's truck is a little different.

 

I didn’t need the relocation kit. 2019 Sport DCSB.

 

That's been our conclusion, too. We think it's just a variance in Toyota manufacturing tolerances, which isn't uncommon. We've yet to see it at our place and install at least 1-2 a week.

 

Do you no longer use the relocation kit at the shop?

 

We leave it up to the customer, but always check for interference too.

 

Anybody in Hawaii currently looking for a kit? I'd like to try a couple different shipping options to the islands. You'll save minimum $150. Holla!

 

Was out of town for a week during the holidays... had the biggest smile driving my taco back to my office this morning

 

I ended up using the sway bar relocation kit. As others eluded to I had the same clunking noise when hitting speed bumps. The sway bar was hitting the cross member on the driver side and the damage was evident to the sway bar once I removed the cross members. I didn't want to remove the sway bar completely, ditch the cross members/stock skid plate or fuss with the relocation brackets again so I just bought fender washers from Lowes. I took a guess and ended up using x6 of the 1/2 - 1 1/2" washers with each cross member bolt to drop them members a little lower. After driving around the neighborhood and hitting various speed bumps the clunking noise has gone away. I recall reading that the sport vs OR sway bar might be a different diameter so this is probably the reason why sport owners have voiced this complaint.

 

Looks like 2017 needs it and 2019 probably not.

 

2020s shouldnt have to work about the sway bar relocation either?

 

In my very small observation I've only seen 2017 or 18 need it. I witnessed no 2019's so I would be cautiously optimistic if I had a 19 or 20 that I did not need it. I don't plan on using it when I do mine.

 

@Ryan at Eibach showin The HI some love! You da man Ryan!

 

I may have to do this. Thanks for the heads up and good thinking!

 

any company other than wheelers provide the option to ship assembled?

 

Yes. Toytec does. That's where I got mine.