CSF All Aluminum Performance Radiator For our trucks FINALLY!!!

Thanks buddy, appreciate it!

 

That is the brand that almost everyone uses, when transitioning to a 160°. Good quality.

 

Thank you sir, it seems that Motorad manufactures them and then they're rebranded. This was a Duralast when i ordered it from Autozone

 

Absolutely correct.

 

URD has the CSF Tacoma specific one for $449 on sale........

edit.....also, the fj one for $349!!!! That’s a deal fellas

 

Anyone have opinions on which electric fan to run? Been looking into the flexalite one. Model 678

 

Spal

 

Spal

 

Alright so then piecing together a spal set up. I'll need a programmable controller and the fan itself. Can the factory shroud and tank be reused? Anyone know the size of the factory fan? 16"?

 

So wanting to do the aluminum rad along with a 170 degrees thermostat, is URD the only place to get the stat from? And is the only way with a conversation kit from URD?

 

I ironically did get my stat through URD. I did not look elsewhere, not to say you can’t find one somewhere else.

 

Any update on this?

 

I got busy and never followed up on it.

 

So a person definitely has to buy a conversation kit to put a 170° thermostat correct?
That would suck if that's the case since a thermostat normally is pretty inexpensive.

 

I was shopping for what I needed in one place and they had an item I needed. That’s how I looked at it.....

 

https://www.tacomaworld.com/out/?url=https://www.mishimoto.com/toyota-4runner-2003-low-temp-thermostat.html&inner=aHR0cHMlM0ElMkYlMkZ3d3cubWlzaGltb3RvLmNvbSUyRnRveW90YS00cnVubmVyLTIwMDMtbG93LQ==&post=16425915

I suppose you can replace with 170* thermostat.

 

The

you could also run the mishimoto 160. It’s for a 4runner bolts right in. my plan is the CSF and the mishimoto 160. I have both just need to install.

 

Ah beat me too it.

 

My Mishimoto arrives today.

 

When will you get around to installing it? curious to see if you get better results over the 160 Motorad one.