Baja Designs: General Discussion Thread

Certainly not you, that’s for sure. Stole it from every overlander with a hybrid bumper.

 

In response to my questions earlier about the bolt size, I ordered some of these tonight. Of course they come in a pack of 50, so if anyone needs some in the future let me know and I can drop a few in an envelope.

https://www.mcmaster.com/93395A257

 

@Baja Designs / @ramonortiz55

Just installed the S8 with supplied harness from BD. Any idea why the middle light isn’t lighting up?

 

I've seen that before. Last time @Baja Designs had to fix it. You can call or email them and they should be quick to respond.

 

I had this issue, “per Baja” I took the lens off an the reflector cups out there’s a circuit board an I just tightened every bolt/screw whatever you call it an it fixed it.
It was my middle section too

 

Hopefully they’re open tomorrow.

thanks for the tip. I’ll give em a call tomorrow if I don’t get a response soon and see what they think.

 

Assuming the truck is on and the bar is getting full power, it could be a board screw (known/rectified issue) if you got this from a dealer with stock from earlier this year.

We are indeed open today. Feel free to give us a call or DM me your email and I will get you in touch with our tech/warranty dept.

 

DMed

 

Fixed the issue; called BD and Paul walked me through a fix...loose connectors on the circuit board.

Thanks all for the help.

 

Hey guys just reaching out to see if anyone had a good fix for moisture getting trapped inside squadron sports. Have two ambers for my fogs on my 17 TRD Sport 4X4 and one has significant moisture inside it. Didn’t want to take it apart in case that messed with any warranty I might have, which if that is the case maybe it could be under warranty? If @Baja Designs has any answers that’d be great too! Bought them almost two years ago from @SDHQ OFFROAD. Thanks!

 

One great thing about BD lights is they’re serviceable so no concerns of voiding warranty removing lenses. If they’ve been fine to this point with 2 years of use it’s probably a cracked or broken lens as a pinched or bad gasket would’ve most likely shown up a lot sooner.

Idk if BD warranties lenses but either way lenses and gaskets are replaceable

 

Start by removing the lens and letting it air out. You’ll need a 2.5mm Allen key. Check the seal and make sure it looks good. If that doesn’t fix it then email Baja and they’ll take care of you. This is what they told me to do when I got moisture in one of my lights

 

This. With emphasis on ensuring the o-ring is properly placed and not damaged. If you see any corrosion inside the light, or if the o-ring appears damaged, please give us a call. Don't forget that assuming you are the original owner of the lights, you have a lifetime warranty.

 

@Baja Designs Have two questions

1. When should we expect the rebates from the BF sale to be mailed back?

2. Do you by chance sell the spacer/bolt kit that you provide Demello offroad for the squadron sports as a separate purchase? Or point me in the direction where you purchase them from? This is for the fog location in their bumpers.

 

1. If you got your rebate in early (first week or two), we were shooting for a 1-2 week turnaround. Later submissions unfortunately may take 30 days or more to process. Sorry! The stack is huge!

2. We do sell the spacer and bolt combination, but I do not recall the exact units/part numbers. If you can relay a description of the parts from Jason/Demello, one of our sales guys can plug them in to an order for you via phone.

 

No worries on the timeline. I am sure it was a huge stack. Hopefully I filled everything right otherwise I am blaming @memario1214 and he can put me in timeout


What I got from jason was 5/16inx1in with a spacer and that he got them from you guys if we ordered the bumper with the bajas and he placed the order through you guys.

 

Got it. If you give us a call, one of the sales guys will take care of you. If not, ask for Chris F.

 

Called in. Jeff got me squared away.

Your wait music got a bit of a stuttering problem.

 

Added an S1 work/scene light on each side. Little guys are bright! Perfect camp lighting.