What Have You Done To Your 3rd Gen Today?

Do you have a link for the seat covers you got? I'm due, and those look pretty cool.

 

Just Replaced my headlight / wiper stalk. I now have intermittent wipers and fog light switch. I've been sitting on this project for a couple of weeks out of dread. Turned out to be simple and glitch free. Took me about an hour with half of that used making trips back to the house and garage to get tools. Only issue I had was I lost the Torx bit used to remove the airbag. Fortunately I had a backup and could proceed. Next up is the fog light.

 

What tent did you get and how was it?

 

Did you have Premium Glass and Tint in Rancho do the tint on your truck?

 

Added extruded aluminium bars to bed rail to accommodate my old Thule rack with "Rain gutter" foot pack. Will be using to support snowboard rack

 

There's a lot of things folks like to eat that don't look appetizing. I'll just leave it at that.

 

And weed was "the devil's lettuce" and meth didn't exist. Good ole days!

 

This is the tent I bought.

$180 Napier Backroadz Truck Tent | Pickup Truck Bed Camping Tent | Rainfly for Water Protection | Sturdy and Spacious 2-Person Tent | Easy 10-Minute Setup

https://www.amazon.com/Napier-Backr...d=1578932533&sprefix=napier&sr=8-4&th=1&psc=1

I ordered the ‘compact short bed’ size and it is a perfect fit for the short bed.

I am 6’ 3” and had no problem fitting length wise in the tent. It’s also very spacious height-wise. At the cost of the tent I was very impressed.

 

Battery dead at 20k. So I guess I get to buy a new battery? Does that count lol

 

Either get a free cheap replacement from dealer or spend the money to buy a good one. Mine went at 18k and I just replaced with better brand 27f and a bigger 2nd Gen battery tray.

 

Bought a good one

 

DOHH!
That went waaay over my head! I've been sitting here thinking what kind of code you were talking about in regards to imoji's.
Given my employment I'm very much surprised that I didn't pick up on that or at least ask about the context.
Sheesh, I need to get more sleep!

 

Haha, no worries! I know the value of enough sleep, although, I won't be getting much tonight......Geaux Tigers!

 

This was actually a couple days ago as I just stumbled on this thread, but swapped from stock wheels to Ray 10s

 

Local Army surplus stores always have them on hand.

 

Welcome to the thread DJ!

 

I tried to install mine and got to a hair of stripping that little screw, so I left it alone. That thing has really frozen up since it was installed in 2015. Probably will end up selling the Gasshole.

 

Some PB Blaster, broken screw extractor and a cordless drill should do the trick. Replace the screw and you're good. Just a thought.

 

I have an extractor I'll probably try this all again in the spring when it's a little nicer out. I thought I could do it quick-like but that was not to be.

 

Cold here too, I get it!
You should see "my" mod pile.

I don't mind being in or playing in the cold, working in it is a whole 'nuther animal.