What Have You Done To Your 3rd Gen Today?

Right. But two fulcrums one beam preloaded on one end already? Dang it. What time does the recycling center close?

 

Tacomods radio knobs

 

If you kids can't play nice in the sandbox, can you find another sandbox? Not the right thread for this.

 

Here's a nice write up on the process. This one is on a 2nd gen so the wires are different colors. The 3rd gen hot wire is blue. I ran a ground wire to one of the bolts behind the tail light. Sorry no pix. Scariest part was drilling holes in the topper.

https://www.tacomaworld.com/threads/softopper-third-brake-write-up.620224/

 

I had to install the shims, still chasing some small vibes.

 

Argh!!!

 

I am sure this has been shared tons of times, but got new Husky X Act Contour All Weather floor mats! They cover a larger area than the OEM all weather mats. Husky's Weatherbeater line does cover more floor space, but the X Act is still very comparable and has a softer feel to it. Should be fine for my pavement princess

 

Lol... best non truck purchase I've made in a long time

 

Looking to adding the flag decal to my black Tacoma sport, still not sure where, what do you think about the tailgate ?

 

Great covers, had them in my 08’. Haven’t pulled the trigger for the 19’ yet.

You can actually get them tighter then how the OP installed them. Take your time and get under the plastic seat trim and they will look much better than the crap ones you see some get. The wrinkles come out after some time in the sun.

https://www.bartact.com/collections/toyota-tacoma-seat-covers

 

That placement behind the mirror is exactly what I was hoping for. It looks great and I appreciate you taking the time for a few pics. I may hit you up later on if I run into any snags on the install, but it looks pretty strait forward.

 

New Custom made finally showed up for my other 3rd Gen. Shipped over a month ago they finally arrived. Almost a shame to make them black.










Lol.

 

Drove to the store in the rain to get chicken wings. Stood in the rain grilling cajun style wings. On to the game!
Geaux Tigers.

 

My Maxtrax finally came in

Now to finalize / figure a way to mount them. Still waiting on my Pelican case though

 

Nice!! It's come a long way in the last 6mo.

 

Busy weekend working on the truck. Installed a Toytec TTBOSSTAC-2016ALM lift with SPC UCAs and AAL in the back.


After the lift, my buddy and I fab'd up a custom outboard bike mount for the softopper. We used 3/8" plate steel for most of it with a 2.5" tube cut in half for the rear wheel. We noticed a lot of side to side flex when just using the side bed rail so we added a reinforcement tube to the front rail as well. Solid now! Drove on the interstate for 4 hours with the bike mounted and it barely moved. It's ready for some trails.

 

Thanks, I appreciate it.

Im thinking a bed rack , rtt and sliders are next. Most likely in that order, but who knows.

 

You two make a lovely couple.

 

Tailgate, rear window, is there a bad place to put the flag?