What Have You Done To Your 3rd Gen Today?

Saw that coming!
Coming along nicely, can't wait to see the finished product.

 

Looks damn good!!!
#teamAC

 

Diode Dynamics SS3 Pros in Yellow Installed.



More pics in the SAE fog pod thread.

https://www.tacomaworld.com/threads...og-light-review.554813/page-126#post-22462751

 

It’s not much but it’s a start..........and about time

 

This week I installed @MESO's chrome delete and stage 1 tail light kits. Good stuff!

 

Diggin it! May have to get me a set.

 

Looks great!!!

 

Second post about these but finally put on the bed bars. Rtt will go on Friday! Fender flares and a few other small goodies are on the way!

 

It’s more like one cigarette every 11 minutes.

 

Sold my spare tire and steel wheel tonight. I got another OEM Off Road alloy and BFG as a spare now

 

You're right! So my math sucks and I stand corrected. It's that damn sixth toe on my left foot that messed me up.
The point is that It was still a whole carton less 1 cigarette (199) in 36 hours.
That's a whole bunch of smoking in a short amount of time.

 

I installed the pipe wrap on all 3x cross members. It has self adhesive tape on it so it stays in place very well.

 

I just bought the VLED V6 Triton switchbacks for my 2019 OR. Looks to be a nice addition.

 

oh man, too soon, too soon

 

Where did you get the rings?

 

I ordered the exact same setup and installed the speakers today. Thanks to Roadkill1081 I learned about and ordered the rear speaker adapter off eBay. It was delivered in 3 days. Unlike Roadkill1081, I am installed the rear Kicker's upside down (as per the label on the cone) so that I won't have to splice the adapter as it is not long enough when the terminals are facing down. I also ordered (and have installed) the Subaru (Kicker) tweeters in the dash. Was not as easy as some led me to believe. I had a little trouble with the disconnect and reinstalling the post covers was also a little frustrating (you have to make sure it lips under the rubber molding). Be sure to remove the negative cable on the battery before you install the tweeters! The first salesperson I talked to at Crutchfield advised me to go with the Kicker 6.75"

$77 46CSC674 6.75" 6-3/4" 600w 4-Ohm Car Audio Coaxial Speakers CSC674

46CSC674 in both front and rear doors. After receiving them I just wasn't comfortable with the setup. A "SUPER" nice lady named Mandy advised me to return them (no return fee) and go with the set up that SmileyGuy ordered. She said they are more efficient than the 674's and the 6 x 9 was a better choice in the front doors. One minor FU...the small clips behind the little triangle trim pieces on top of the front door panels fell down inside the door as I tried to reinstall them. Will get some more from a body shop or dealer tomorrow. Tip: pull them out of the door and reinstall them on the trim plates before putting them back on. If you don't, the chance of pushing them in the door panel is very high and they go into "clip heaven" and don't fall into the bottom of the door.
BTW--system sounds great (I have the 8" display model radio).

 

Weight behind the axle can lift the front of the truck. But the amount of weight also has to be factored in. 200 lbs shouldn't make that much difference. That being said, the best place I have found is directly over the rear axle. I ran it that way with 300 lbs in my F150, and my Taco set up that way as well with about 200 lbs. I moved it forward because I thought I lost too much room near the tailgate for bulk items.

 

All bolted up and ready to go. Skids and slimline/winch bumper go on today.

 

42 - 25? I bet y'all are happy this morning.

 

Those Harrops are great, I have one on my 1st gen. I'd be curious to hear some feed back on the 5:29s and 33s after you've logged a few miles. Are you MT or auto?