1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Loginfailed’s Spare Parts Garage Sale (Houston Area) SOLD KC Gravity G4 Amber fog lights adapted to fit ARB bumper SOLD UnderCover bed cover and Bed Rug *Need*D/S Lower control arm w/ ball joint WTB: Bilstein B110 5100 Rear Shocks (Extended Length) Diamondback SE truck cover for long bed.

Wheel Bearings & Hubs Press Service *** OE NSK ***

Discussion in '2nd Gen Tacoma Parts Marketplace (2005-2015)' started by 05Taco4x4, Mar 4, 2018.

Page 48 of 114
  1. Jan 10, 2020 at 5:53 AM
    #941
    RedSoxRobbe

    #941
    RedSoxRobbe Active Member

    Joined:
    Apr 30, 2017
    Member:
    #217764
    Messages:
    28
    Gender:
    Male
    Got em - thanks!
     
    RedSoxRobbe, Jan 10, 2020
    #941
    05Taco4x4[OP] likes this.
  2. Jan 11, 2020 at 6:27 AM
    #942
    RedSoxRobbe

    #942
    RedSoxRobbe Active Member

    Joined:
    Apr 30, 2017
    Member:
    #217764
    Messages:
    28
    Gender:
    Male
    Hey all, need a quick sanity check.
    When I look up 90304-A0001 (outer seal), it says that it does not fit my 2011 Tacoma 4x4 Sport. I did however find that 90316-A0001 (inner seal) does fit my truck (parts sites and dealer lookup).
    Is there alternative outer seal I need that pairs with the inner?

    We've got one warm clear day here in VA, and I want to knock this thing out! I've got the bearings/hub assy (thnx @05Taco4x4 for the quick, space travel ready shipment). Just want to confirm the right seals (since I don't want to pull this apart this damn thing again in 30k miles for bad bearing again due to crap getting in the seals).

    Thanks.
     
    RedSoxRobbe, Jan 11, 2020
    #942
  3. Jan 11, 2020 at 6:53 AM
    #943
    05Taco4x4

    #943
    05Taco4x4 [OP] ToyotaHubs

    Joined:
    Jun 29, 2011
    Member:
    #59085
    Messages:
    6,278
    Gender:
    Male
    Vehicle:
    2TR-FE Enthusiast
    FJ Tcase, Manual Hubs, 2017 Head unit, Mirror Riser
    Confirm fitment here:
    https://parts.toyota.com/p/Toyota__/SEAL/63539773/90304A0001.html
     
    05Taco4x4, Jan 11, 2020
    #943
  4. Jan 11, 2020 at 6:59 AM
    #944
    RedSoxRobbe

    #944
    RedSoxRobbe Active Member

    Joined:
    Apr 30, 2017
    Member:
    #217764
    Messages:
    28
    Gender:
    Male
    Thanks again brother!
    Looks like it does fit!
     
    RedSoxRobbe, Jan 11, 2020
    #944
    05Taco4x4[OP] likes this.
  5. Jan 11, 2020 at 1:40 PM
    #945
    DR Da_da

    #945
    DR Da_da Infrequent Member

    Joined:
    Aug 28, 2010
    Member:
    #42390
    Messages:
    398
    Gender:
    Male
    Alabama
    Vehicle:
    '06 4x4 V6 TRD Offroad auto access cab
    ToyTec ultimate lift, LR UCAs, TRD gen 1 CAI, TRD cat-back, bull bar, anytime fog lights, lighted 4x4 switch, factory SS step tubes, factory interior lighting package, factory VIP 3200 alarm, FJ TRD center caps, rear diff breather relocate, tint, bug deflector, Weather Tech liners
    Hub/bearing assemblies arrived! Thanks for packaging them so well - New Orleans’ USPS didn’t do any favors trying to be gentle with the box, but the assemblies survived just fine!
     
    DR Da_da, Jan 11, 2020
    #945
    05Taco4x4[OP] likes this.
  6. Jan 11, 2020 at 9:14 PM
    #946
    DavesTaco68

    #946
    DavesTaco68 Well-Known Member

    Joined:
    Oct 22, 2016
    Member:
    #200391
    Messages:
    3,349
    North Thompson, BC
    Vehicle:
    2013 Tacoma TRD
    - ICON UCAs, BP51/Kings, SCS wheels, 285s, Leer 100XR canopy. Greenlane aluminum winch bumper, Smittybilt X20 winch. Trying Falken AT3w now, Really like BF KO2s.
    Shipped on Tuesday - received on Friday, Fast service! Thanks!
     
    DavesTaco68, Jan 11, 2020
    #946
    05Taco4x4[OP] likes this.
  7. Jan 11, 2020 at 9:23 PM
    #947
    3JOH22A

    #947
    3JOH22A トヨタ純正男娼

    Joined:
    Mar 27, 2019
    Member:
    #288172
    Messages:
    12,957
    Gender:
    Male
    District 6ix
    Vehicle:
    3G Tacoma on 35"s, 5G 4Runner
    You can actually get them on Rock Auto for reasonably cheap.
     
    3JOH22A, Jan 11, 2020
    #947
  8. Jan 12, 2020 at 6:39 AM
    #948
    tacoma oh7

    #948
    tacoma oh7 Well-Known Member

    Joined:
    May 28, 2017
    Member:
    #220119
    Messages:
    101
    Vehicle:
    2007 TRD Off Road
    Loosened the nut behind the wheel. ADS mid travel.
    Thanks for the advice. I generally try to stay away from Dorman parts tho. Still looking for some oem ones.

    My bearings arrived. Haven't got them opened yet but the box looks to be in surprisingly good shape for the weight of it.

    Thanks again 05taco
     
    tacoma oh7, Jan 12, 2020
    #948
  9. Jan 12, 2020 at 7:06 AM
    #949
    KS_taco316

    #949
    KS_taco316 New Member

    Joined:
    Dec 29, 2019
    Member:
    #314563
    Messages:
    2
    Gender:
    Male
    Thanks! 05taco
    Parts arrived
     
    KS_taco316, Jan 12, 2020
    #949
    05Taco4x4[OP] likes this.
  10. Jan 12, 2020 at 9:30 AM
    #950
    3JOH22A

    #950
    3JOH22A トヨタ純正男娼

    Joined:
    Mar 27, 2019
    Member:
    #288172
    Messages:
    12,957
    Gender:
    Male
    District 6ix
    Vehicle:
    3G Tacoma on 35"s, 5G 4Runner
    Did you check the branding of the hub flanges you just got? ;) Only Dorman parts to avoid are rubber seals and bearings -> for those go with OEM or a major bearing mfr. Metal and plastic parts are fine.
     
    3JOH22A, Jan 12, 2020
    #950
  11. Jan 12, 2020 at 10:44 AM
    #951
    tacoma oh7

    #951
    tacoma oh7 Well-Known Member

    Joined:
    May 28, 2017
    Member:
    #220119
    Messages:
    101
    Vehicle:
    2007 TRD Off Road
    Loosened the nut behind the wheel. ADS mid travel.
    Haven't opened them yet, but I have a good guess as to what they'll say.

    Do you know if the Dorman knuckles are identical to the Toyota forgings? They looked different enough from the couple pics I've seen for me to immediately write them off, but I could be mistaken. I have a set of chaos fab gussets that I need to weld to them. I'm not just doing bearings, I'm swapping from a beat stock suspension to a mid travel setup.
     
    Last edited: Jan 12, 2020
    tacoma oh7, Jan 12, 2020
    #951
  12. Jan 12, 2020 at 8:17 PM
    #952
    DR Da_da

    #952
    DR Da_da Infrequent Member

    Joined:
    Aug 28, 2010
    Member:
    #42390
    Messages:
    398
    Gender:
    Male
    Alabama
    Vehicle:
    '06 4x4 V6 TRD Offroad auto access cab
    ToyTec ultimate lift, LR UCAs, TRD gen 1 CAI, TRD cat-back, bull bar, anytime fog lights, lighted 4x4 switch, factory SS step tubes, factory interior lighting package, factory VIP 3200 alarm, FJ TRD center caps, rear diff breather relocate, tint, bug deflector, Weather Tech liners
    Bearings/hubs installed. I also changed the inner seals (on the back of the knuckles) while I was at it. Truck is smooooth and quiet! Surprised I got 101K miles and 14 years out of the original bearings. Thanks, 05Taco4x4!
     
    DR Da_da, Jan 12, 2020
    #952
  13. Jan 13, 2020 at 12:05 PM
    #953
    05Taco4x4

    #953
    05Taco4x4 [OP] ToyotaHubs

    Joined:
    Jun 29, 2011
    Member:
    #59085
    Messages:
    6,278
    Gender:
    Male
    Vehicle:
    2TR-FE Enthusiast
    FJ Tcase, Manual Hubs, 2017 Head unit, Mirror Riser
    05Taco4x4, Jan 13, 2020
    #953
    Cash13, Ssparrow and riz_atx like this.
  14. Jan 13, 2020 at 12:15 PM
    #954
    riz_atx

    #954
    riz_atx #bigpermtaco #teamBP

    Joined:
    Jan 5, 2017
    Member:
    #206621
    Messages:
    10,674
    Gender:
    Male
    First Name:
    Sohail
    Spicewood Texas
    Vehicle:
    ‘16 4x4 DCLB GFC Locked, Geared, Tuned
    C4Fab/RCI/BAMF, ADS, 4.88, Lockers, OVTune
    riz_atx, Jan 13, 2020
    #954
  15. Jan 13, 2020 at 7:41 PM
    #955
    3JOH22A

    #955
    3JOH22A トヨタ純正男娼

    Joined:
    Mar 27, 2019
    Member:
    #288172
    Messages:
    12,957
    Gender:
    Male
    District 6ix
    Vehicle:
    3G Tacoma on 35"s, 5G 4Runner
    Aside from the slightly different photo perspective, how do the knuckles look different?
    Dorman: https://static.dormanproducts.com/images/product/medium/698-149-002.JPG
    Toyota: https://parts.toyota.com/images/parts/toyotaOEM/parts/fullsize/4321204050_2.jpg
     
    3JOH22A, Jan 13, 2020
    #955
  16. Jan 14, 2020 at 6:14 AM
    #956
    tacoma oh7

    #956
    tacoma oh7 Well-Known Member

    Joined:
    May 28, 2017
    Member:
    #220119
    Messages:
    101
    Vehicle:
    2007 TRD Off Road
    Loosened the nut behind the wheel. ADS mid travel.
    Those look way more similar than the pics I saw.

    Since you asked:

    The bend on the bottom of the top ball joint mount is shaped differently.

    Next to the sway bar mount, there is a nub on the toyota one, the dorman has a rib that goes up to the bend.

    The toyota ones are narrower below the sway bar mount.

    The reinforcing rib on the steering arm is different.


    So, they are definitely a differently contoured forging.

    It's not worth it to me if I have to take the perfectly fit laser cut parts and modify them to line up.


    Anyways, thanks for clarifying that they are different.

    Sorry OP, I intended to just post one post to ask for what I wanted.
     
    tacoma oh7, Jan 14, 2020
    #956
  17. Jan 15, 2020 at 10:14 AM
    #957
    05Taco4x4

    #957
    05Taco4x4 [OP] ToyotaHubs

    Joined:
    Jun 29, 2011
    Member:
    #59085
    Messages:
    6,278
    Gender:
    Male
    Vehicle:
    2TR-FE Enthusiast
    FJ Tcase, Manual Hubs, 2017 Head unit, Mirror Riser
    05Taco4x4, Jan 15, 2020
    #957
    mcharfauros likes this.
  18. Jan 16, 2020 at 6:12 PM
    #958
    Ssparrow

    #958
    Ssparrow New Member

    Joined:
    Sep 7, 2019
    Member:
    #304593
    Messages:
    1
    Gender:
    Male
    Received today! Nicely packaged and quick shipping. Will be installing this weekend.
     
    Ssparrow, Jan 16, 2020
    #958
    05Taco4x4[OP] likes this.
  19. Jan 16, 2020 at 6:14 PM
    #959
    riz_atx

    #959
    riz_atx #bigpermtaco #teamBP

    Joined:
    Jan 5, 2017
    Member:
    #206621
    Messages:
    10,674
    Gender:
    Male
    First Name:
    Sohail
    Spicewood Texas
    Vehicle:
    ‘16 4x4 DCLB GFC Locked, Geared, Tuned
    C4Fab/RCI/BAMF, ADS, 4.88, Lockers, OVTune
    Got mine as well! Will also be installing this weekend :)
     
    riz_atx, Jan 16, 2020
    #959
    05Taco4x4[OP] likes this.
  20. Jan 16, 2020 at 7:30 PM
    #960
    RedSoxRobbe

    #960
    RedSoxRobbe Active Member

    Joined:
    Apr 30, 2017
    Member:
    #217764
    Messages:
    28
    Gender:
    Male
    Never underestimate the power (in terms of time, sweat, and frustration) of a 3-prong bearing puller! For reals!
     
    RedSoxRobbe, Jan 16, 2020
    #960
    05Taco4x4[OP] likes this.
Page 48 of 114

Products Discussed in

National 710573 Wheel Seal
$13.94
Genuine Toyota 43570-04011 Axle Bearing Assembly, Front
$171.80
Super Lube 56204 O-Ring Silicone Lubricant, Clear
$11.10
Genuine Toyota Parts - Cap, Fr Hub Grease (43514-28010)
$32.43
Lisle 61960 3-43/64" Bearing Driver
$33.35
ABN Bearing Race and Seal Bush Driver Set with Carrying Case – Master/Universal Kit for Automotive Wheel Bearings
$22.99
Lisle 12930 Pneumatic Bearing Race and Seal Driver, 3.813"
$22.86
Lisle 12730 Pneumatic Bearing Race Driver Handle
$13.35
To Top