Weathertech Floormats on 1st Gen

Well thanks for the input but I'm really looking for a simple yes or no if they fit. I like a nice clean look and I don't mind spending some money on the truck

 

Nobody?

 

As i have already stated a few post back, the fronts are no different, they just dont make a rear set for the DC. Why Idk? Best way to go is Husky floor liners anyhow, there cheaper and just as good.

 

No, they don't fit

I bought fronts for an Extended cab (01-04) to install into my DC.
They did not fit. The corners were off (I forgot which corner(s))

 

X2. I am constantly having to straighten mine out every time I climb in the cab of my 02' DC! Very frustrating! They are not laser fitted like the liners are. At least that's the way it was explained to me from the shop I bought them at. I just didn't want to pay the extra money for the liners.

The problem I'm having is that they don't lay flat on the floorboard. The lower righthand corner lays up onto the side of the drive tunnel by several inches which every time you place your feet onto the mat, it wants to slide down and put that left rear corner onto the doors thresh hold. I may have to trim that corner off and see if that prevents the mat from shifting.

In hindsight, I should've popped for the liners. I got what I payed for. Other than that, the mats are very heavy and durable. I hope this helps.

 

I have the Weathertech mats in my 04 DC. I had to cut or trim a small part of the back inside corners that are closest to the middle of the truck that has a hump for the transmission. Attached are pics. Works great and does not slide around. You cannot tell it's been trimmed.

 

Mark, thanks for posting pictures. I was inside my truck this morning and had to fiddle with them again. This post is a good reminder to get them cut down to size.

 

I absolutely HATE mine. I wear a size 13, which isn't too big, but my they made my foot catch the underside of the dash all the time and really messed with my knee. It's weird, I know.

I finally just took my driver side one out after a 2 hour drive one day and haven't looked back.

Actually, now that I think of it, they may not be weather-tec ones. I think they may be the Toyota ones...

 

I'm happy some one did this but it leaves me wondering if 4runner digital fit liners would fit better...........

 

Just stumbled across this thread and was wondering if the 01-04 xtra cab mats would fit in a 95 xtra cab. Are the cabs the same or different? Any help would be much appreciated.
Thank in advance.

 

I also have a Double Cab and didn't realize I ordered WeatherTech's for an extended cab. Then I found out they don't make them for the DC. I was disappointed but didn't want to send them back. They are pretty pricey to cut up and it looks like i trimmed off a little more than I had too....

 

What color are these floor mats? are they the tan or grey? also it looks like your interior is tan? is that correct, hard to tell from the pictures?

Thanks!

 

was one of my first purchases when I bought my truck. I have an ext cab so they fit perfectly. Had them in there for 5 years (pic when they were brand new) and even though scuffed up a bit they sure do hold up pretty well.

 

They do offer them for the DCs. I had ordered them and was quite pleased except for the passenger side. They have nothing to grip at all and it just slid about. I guess you could velcro but I ended up going back to the husky all weather mats.

https://www.weathertech.com/toyota/...ission/automatic/tacoma-cab-style/double-cab/

https://www.tacomaworld.com/threads/weathertech-mats-for-1st-gen-doublecab.549481/#post-17916696

YMMV

 

Just pulled the trigger on the a front and rear set of the molded WeatherTech mats for my '03 DC. Fitment is near perfect. No trimming. The hook in the carpet from my 17yr old Huskies lined up exactly with the hold in the new WT mats. Really pleased with the purchase, just wish I had done it sooner!

 

I have them, they look + work great! I know a lot of people like the husky liners but I think the weathertechs look better. Always love the quality of weathertech products but they are pricy.

 

does anyone know, or have seen how the weathertech's fit in a pre 2001? say 98-00? are the floor panels any different?

 

I see you have a manual transmission, have you noticed any problems with it interfering with the clutch?

 

Mine fit perfect. I love them and well worth the money. A member on here even makes SWEET custom TRD inserts for em.