2020 Tacoma OEM LED Headlight Megathread

So you basically saved $100 per Headlight compared to buying them online?

 

that’s a sweet deal. I can get the headlights -25% off with my discount. So it comes to around $870 CAD/each. I’m just having a hard time justifying the cost when I have a perfectly good pair of pro headlights right now.

Maybe I’ll sell the pro headlights I have to cut the cost a bit. I don’t know how much a used (but mint condition) Pro headlights would go for in Canada

 

If you can get them for $830 CAD, then yeah. Do you know where to order OEM Toyota parts online in Canada?

 

Just FYI Olathe Toyota has a $10 off coupon with "newtoy" for first time buyers. Not much, but something.

https://parts.olathetoyota.com/

 

Sweet, instead of $1575/set, they’re $1565

 

I’m wondering if these lamps will climb in price like the pro grille and garnish?

 

I doubt they will since they will be a replaceable part.

 

Did you adjust the headlights after install? I just did mine last night and my beam isn’t perfectly straight like yours. How do you adjust the beam?

 

Yes, my lights have required aiming after installing. There is a single white plastic 8mm bolt on the back of the light. The driver's side is easily accessed without moving anything but I find I need to remove both of the bolts holding the windshield washer reservoir on the passenger side to move it slightly out of the way to get easier access to that side. If your hands are smaller you might not need to do that. I'm using a small 8mm ratcheting box end Craftsman wrench. Since there are virtually no shops with a proper beamsetter for alignment, even here in Los Angeles, it's been an iterative process to get them correct and it's actually quite a bit more difficult to do compared to the projectors since the beam cutoff is considerably softer with these new lights, and seems to be even softer toward the far edges of the beam.

 

Or you can use a Philip's screwdriver for the passenger side headlights to adjust.

 

Awesome. Do you have the part number you used to order the entire kit?

 

The 2017-2019 Pro headlights are super expensive for some odd reason.

 

There's only about an inch, maybe less, of clearance between the adjuster on the passenger side and the wiper reservoir. Even a stubby Phillips is way too long (and fat) to get in there. Take less than a minute to take the two retaining bolts for the reservoir and move it an inch back, which is about as far as it'll go without fully disconnecting it, but that's all you need.

 

You’re supposed to use a long Phillips and stick it down that channel that leads to the adjuster. The screwdriver and the teeth on the wheel act like gears to turn the adjuster.

 

Lol, stop it.

 

Oh, ok. Now I got it. Sorry for the misunderstanding.

 

Sorry for the late reply
The parts department can print out the instructions for you as well

 

are you still making these ??

 

Just curious has anyone with a 2020 TRD OR tinted the new led fogs yellow as opposed to going aftermarket? Just curious