1st Gen Lunchtable Thread - General Discussion

Turn it on for .4 seconds and youll find out

 

Already have, how you think I'm pumping the old out? Only have one line disconnected.

 

Would

 

Gravity, yes. But thru the top cooler line feeding into the rad. Pump it out there from the trans with the engine running and gravity feeding into the rad cooler.

 

Youre confusing me all you have to do is stick one hose into a bucket and the other into the jug of atf unless 4th gens do it differently

 

Nope, that didn't work. There's no suction coming from the upper rad port. I tried it with the funnel full and pumped out a couple quarts. The funnel was still full after. So no suction there.

 

Interesting do the 2 lines coming from the trans just follow the frame rail and turn into rubber hose somewhere by the front crossmember?

If so one of those 2 lines has suction and the other has pressure

 

Speaking of which, its been a couple months and i still havnt gotten any word about my sliders

 

When it rains... it pours

 

Maaco blue?

 

the dreaded flexseal

The flexseal tape is nothing but junk. This stuff works well with exterior light fixtures - sealing around the edges of the housing. As for the spray cans, haven't used that stuff yet.

 

True north fabrications, ive already had the bumper i ordered the day before the sliders made and installed for like a month

 

I did the full TSB steps last summer. Pain in the ass to pull the fender and cowl. Also, don't miss the A-pillar part.

 

kinda like skid plates?

 

Question... i took the thermostat out of my moms cruiser to do a coolant flush... so i could have the coolant flow at all times and not just when hot

By doing that did i just make the ability to drain all the coolant at once via the valve at the bottom of the rad?

 

No

 

Dinoco Blue

 

Cool so drain as much as i can and fill with water a couple times to get the crap out than drain and fill with coolant?

 

And I guess there is no trans filter on the A750F either. Just some metal mesh thing. So I'll be adding a Magnafine line filter at some point soon.

 

That is the filter and it works fine