1st Gen Lunchtable Thread - General Discussion

Yeah, that's a decent enough way, won't get much. Prestone cleaner or apparently some powdered laundry detergent help.

 

Yeah, but not replaceable from what I understand. Drop the pan to clean it and that's it?

 

Yeah i already poured some zerex radiator flush in there

 

Anyone, or @mechanicjon

can the odo be swapped on First gen clusters?
Need to swap the one on my fathers 02

 

Yeah its replaceable

 

Tyler did a thing for his 5 lug may want to talk to him

 

Anyone wanna get me the length of their dipstick on a 3.4?

 

Digital ones can easily be swapped

 

Its long enough to arc on the positive battery terminal when my brother checks the oil

 

let me see if mine does

 

Interesting. Found them online, about $60. I'll have to look into that later. Still gunna do the Mangafine and maybe even a larger trans cooler. The stock one is dinky and there's a ton of room in front of the rad.

 

Is the 1st gen non elocker 3rd member the same as the second gen?

 

Second gen is wider

edit: oh just the 3rd? Idk

 

Go full land cruiser spec on the cooler. Mines have the width and the full height of the radiator and pulling the trailer on 105° day I couldn't get the fucker over 198°

 

3rd member is the same tho isn't it? Actually I'm sure it is

 

I’m not sure about the third

 

Just the 2 screws?

 

I didn't spend enough time going up toward the a-pillar in #16. I managed to remove the fender bolt at the bottom of the a-pillar to squirt the sealer into the area.

It was a pain in the ass. It took 24 hours for each coat of the sealer to dry. I applied 2 coats over 48 hours. It rained every afternoon while I was working on it. I had to keep the truck covered with a tarp since it was outside.

 

Nice, TSB is only for 97-04. I've never had any newer than the 96 haha

 

8.4 AFAIk