Colorado Trading Post

Hey Gents,
Im selling a 3rd gen OEM rear bumper off my 2016 Tacoma. Its in great condition and the chrome caps are pristine. Comes with the license plate lights and bumper wiring harness. Asking $125 for everything
located in Fort Collins, Also up on FB marketplace

 

Just putting out a feeler. Our family situation is changing some and was curious to see if anyone was looking for a first generation Double cab.

04 DC silver 4x4 167,000 miles
I replaced timing belt all fluids less than a year ago. Has a matching snugtop XTR topper fresh rhino liner new double din stereo with backup camera and upgraded seats from our very own madgik man. New wheels and tires off the third gen TRD off roads with only a few thousand miles on them. Anyone in the market for one?

 

You still need a white front bumper?

 

Let me mention this to my buddy. His family only has one vehicle and that turd needs his own vehicle.

If you'd prefer, PM me what you're looking to get out of it.

 

I should also mention that if I did I would be looking for a low mileage second gen or third as well if someone misses the first gen.

 

For sure, just let me know I’m just testing the waters

 

I’m bored. Somebody sell me something.

 

WTB 16" rims for a leveled tacoma, could have tires as well.

Heck any rims/tires that nobody needs anymore.

 

I’ve got a kilo of the finest Columbian Bam-Bam with your name on it

 

Tires aren't much to write home about, but the wheels are in excellent shape. $300:

 

Where in CO are you located?

PM'd

 

I have 4 stock steel 16” rims off my truck. Not in great shape, could use some paint. Free.

Gone

 

Not mine.

 

Picked up a flippac camper so I am selling off my old setup... topper, tent, prinsu racks, rifle cases, ski rack, and a set of bed bars. Everything is off the truck and ready to go. Came from a 2nd gen, 2009 access cab.

CVT Mt. Bachelor - 2 person tent - SOLD

Prinsu top rack for long bed topper - $400 firm

Original prinsu rack powder coated by prinsu with some touch ups over the years. Has some wear and scratches from the tent rails and being used as a roof rack. Has hardware to mount on topper tracks as shown. Includes all bars that came with it plus some spare hardware which I will split between the top rack and cabrac if they go separate.



Pinsu access rack - $400 firm

This will only fit an access cab. Will not fit a double cab. It requires drilling 12 holes in your roof and installing rivnuts which are NOT included because they are still in my roof. I have one spare you can use to get the right size. All of the other spacers and screws required install are included. Rifle cases sold separately below.

Edit: Also part of the deal would include trading your undamaged roof top weather stripping for mine, which has already been cut for the rivnuts.



Rifle cases - 2 available for $75 each

They did not prove to be water proof despite the "All weather Tactical" labeling. I kept recovery gear and cv axles and drive shafts in them. They are attached to access rack via carriage bolts so they have holes in the bottom. I also have the original foam inserts (not pictured).


ATC "Colorado" edition topper $650 firm

Will fit a DCLB or access cab. Comes with clamps. All the glass is perfect. All windows are sliders. The windows screens aren't perfect but darn close. The cosmetics arent perfect. Theres a few places where paint has scrapes off from my hitting the cab up front, taking the tent on and off in the back, and the rear passenger side corner from my shovel that was on the rack and rubbed. I have pictures of some but not all of the blemishes. Otherwise the shell is in great condition and I do have some touch up paint if it's not dried out. Working brake light will need to be wired for your truck. Dual locking t handles come with keys.






Thule ski / snow board racks - $60

Includes keys and security torch bit. 30" wide.




Steel bed bars - $50

Bought from another member like 2 years ago and never used them. Includes mounting hardware to bolt into rails. 61" wide

Edit: These sit on top of the rails and attach via t-slot nuts.

 

[Are these the Toyota bed bars that attach to the rail integrated tie downs. Of so I'm interested and want them

 

Dude. Do you have enough for everyone? Or me at least?

 

If no one has claimed them, I'll take them.

 

They are not made by toyota, but they do bolt into the bed rails using the t-slots nuts.

 

I have a 2012 White front bumper and crash bar for sale: https://www.tacomaworld.com/threads/2012-front-end-parts.649547/

 

Can you take some other pictures so I can see them? I don’t think they will work with my topper like the Toyota ones do that mount on the factory rail adjustment points