2nd gen, Anytime-On Rear View Camera with Switch on Dash mod

So in trying to follow the original posting for this, I've messed up 3 things. ..... My remote lock/unlock key fob, the air bags, and lsd. The lsd light is on but non of the abs is working. Track, abs, etc.

 

did you buy the wiring harness from anytimerearcamera.com?

https://www.anytimebackupcamera.com/collections/frontpage/products/anytime-backup-camera

 

No I didn't.... I tried finding that n1 red wire to connect into.... Didn't work so well . The wire harness in the link is sold out..

 

You definitely need that harness I’m not sure what wire you’d have to splice off the OEM connector with out that pice.

 

I finally got my switch installed and got the camera to come on anytime. Here’s a few pics of the switch I used. I just drilled out the blank

 

Subd for future mod!

 

Anybody mess with changing the lens for the front camera? I feel like 170 - 180ish degrees isn't really needed in the front, and I'm guessing the distortion makes things in front seem way too far away.

 

Have to put this on my have to do list. Thanks.

 

I'm pretty happy with how this turned out on my 2015. Great mod!

 

Does yours display through the rear view mirror or do you have a nav screen?

 

I can toggle front and rear cameras through the dash screen. It's an entune model without navigation.

 

Is this same mod possible if the screen is on the rear view mirror on my 2012?

 

¯\_(ツ)_/¯ I don't have one of those. I used the harness from anytimebackupcamera.com and plugged it in between my existing harness to my radio. I'm sure there's a way to make it work.

 

Subbed!

 

I bought the same kit...was the depth behind the switch location an issue?

did you have to remove that lower dash piece to install the switch or were you able to feed the plug to the hole without removal?

 

Does anyone else have their camera "time out" after leaving it on for a bit, like maybe 3-4 minutes? My wiring is a bit different than described here if I remember right (it's been a couple years since I wired it) but I'm not sure that really matters.

 

You have to push the blanks out from the inside. You have to take off the radio cover. Once you push out the blank, you just drop the switch in first from the outside, then connect the wires after. No problem with space.

 

I apologize if this has been hashed out but for 2013s with the factory mirror display, can this still done using anytimebackupcamera front/rear camera harness? And if I paired that harness with something like https://camera-source.com/2013-tacoma-mirror-to-radio-camera-conversion.html could the display still be moved to the head unit?

 

This is E.X.A.C.T.L.Y my same question. I just want to have my rear camera come up on my Pioneer head unit, instead of my rearview mirror. Then, if I can make it that way with a harness and put in a switch to let me check it on the fly, EVEN BETTER. Anyone have an answer on this??

 

Reviving an old thread. Hopefully someone sees this.


I followed the instructions here, but still not get the desired results. Any electrical gurus see a problem with my wiring?

I have everything loosely test connected now. When I push the button the only thing I get is thre reverse light on the dash to come on. But no camera in the rearview mirror.