33s, 10inch wide on STOCK WHEELS??

Hello, I have a 2008 4.0Lv6 manual(6-speed) tacoma access cab long bed(6.1ft) that I recently purchased a 3 inch rough country LIFT kit not a leveling kit, and I want to put 33s on my stock wheels, i was wondering if anyone had fit 33in(height) tires by 10inches wide on there stock tacoma wheels which are anywhere from 15-18inches tall and 6-8 inches in width, i believe mine are the 16x8 wheels. any help is much appreciated, also wondering if any one has fit this, is there any rub?, therefore needing wheel spacers? I JUST REALIZED I HAVE 16x7 STOCK WHEELS

 

You'll likely need spacers to clear the UCA.

*edit...should be fine with 255/85/16 without spacers but you may rub a bit on the mudflaps/wheelwell/cab mount.

 

That's like 255mm so yeah it would fit

 

It is reported that 255/85-16’s and 255/80-17’s work on most 2nd gen Tacomas.

 

According to my manual with my tires being 265/70-16 , i have 16 inch tall wheels by 7 inch wide, and these are the stock tacoma wheelsthe highlighted is mine

 

yeah the rim is 7 wide the tire is like 10.5

 

Then look up 255/85/16’s. They are all E rated tires I believe but the dimensions you asked for. I have 255/80/17’s the 17” equivalent on first gen Tundra wheels

 

My 255/85’s fit fine on stock wheels. No spacers needed