Ontario BS Thread

I die inside a little each time i enter the office. It's been 2 years.
At this rate, i'll die in 7 days

 

My bad gents, I will settle the fk down.






On a side note, HOLY CRAP 2gauge wire is $$$$

Got a quote for the stuff I need to wire up front and rear winchie action.

$287 for the wire and Anderson connectors

 

Princess Auto has 25’ 2gauge jumper cables on sale for $20. Cut the clamp ends off, and that maybe cheaper than the bulk roll, or paying by the foot.

Those Anderson connectors are sweet, I think you posted them up before.

@Norilsk hope the PRNDL stick doesn’t make you want to die while #TrdGen under repairs. I’ll take a lame T-case shifter over a lame transmission shifter anyday. #6spdFTW

 

A non-momentary ECT POWER button that doesn't reset every time you start the truck? What is this ancient witchcraft?

 

how many feet do you need?

 

It's a beauty eh! Love it with the J-shift

 

I dont trust that cost, $20 does not seem right. I bet when you cut the end off those jumpers, its not true 2gauge wire.

The quote I got is by the foot. I went 5 feet over whatI estimate I need, for just incases.

#2 WELDING CABLE BLACK WELDING CABLE 9 meters @ 8.95 /meter $80.55
#2 WELDING CABLE RED WELDING CABLE 9 meters @ 8.95/meter $80.55

 

way too much money man. I can get 2/0 for $250 for 25ft at welding supply. Make your own. Can buy a crimper online for $30.

 

i need too! 30ft!

 

you need 2/0 though.....

If its cheap I need 30 ft of 2/0 as well. Bulk deal if we get 60 ft together?

 

#2 welding cable is 2/0 right?

I am derp when it comes to this shiz.





@pete37 30 feet is what I am looking for.

 

negative. 2/0, 1/0, 0, 1 guage, 2,guage, 3, guage....14 gauge, etc etc

I did 1/0 for the front winch. For your rear you need 2/0 but for what ever reason winch companies always sell undersized wire.

 

Ok

I got him to quote me on 2guage, from what I could tell that is what I require.

#2 WELDING CABLE BLACK WELDING CABLE 9 meters @ 8.95 /meter $80.55
#2 WELDING CABLE RED WELDING CABLE 9 meters @ 8.95/meter $80.55

 

could just go with what ever colour and ensure the heat shrink is colour coded. So my welding wire I get from my supply is blue and I just colour code the ends. Check out Linde or a welding supply. even pricess auto may be cheaper. Unless @pete37 comes in clutch as usual, best deals in town.

 

Ok Lind is just down the street from where I work.

@pete37 can you get the anderson connectors as well? I need 3 of them that fit the 2guage wire. 30 feet of 2 different colors. I am not as good as @tacoma16 and require different colors.

 

lets check it out give me a minute or 2

 

Princess Auto flyer. Two options, assuming a large difference in quality between the two sets.

 

not cheep like 250. for 50 feet grote Part# 82-5701