Has anyone figured out auto headlights on SR

I have the limited column switch with the auto feature , installed that switch today, got factory fogs and factory wiring harness also. Plug and play !! But I want to know how to make my headlights auto on and off since it’s on my new switch

 

im pretty sure there is a sensor for the headlights that you're missing.

 

I have the spot for a sensor it’s just a cap in the spot right now , I took the speaker grill off but I did t find a wiring harness there though

 

well looks like you found the problem. Good luck.

 

Likely just the dash sensor and the turn switch stalk, but it's too risky for how much they sell for.

Unless you find the 3 wire connector to the sensor under the dash it's not really worth the trial.

 

It might be under the speaker but I didn’t have time to take it out to see ,I’m hoping it’s underneath there

 

What is cool is when I put it on auto now my DRL and fogs come on at the same time

 

Interested

 

Yeah that’s pretty cool to have those two on at the same time

 

I thought this wasn't possible because the BCM wasn't programmed for it. Be cool if it worked though! Everyone would be all over it

 

Check Connector M6 on the Main Body ECU for the 3 wires...

 

OP, remove the cubby on left of the steering and take a pic of the M6 connector...

 

You got auto headlights to work?

 

No that’s just the DRL and fog lights

 

take another look. thats day time running lights

 

I believe I will need to change the radio out to an entune with gps then add the sensor cause theirs a control on that radio for auto headlights I thinks that’s the key

 

I was being purposefully facetious.

 

Listen to @caribe makaira , he's the wiring guru. He'll let u know whether it's prewired etc.