What Have You Done To Your 2nd Gen Tacoma Today?

Why thank you

 

Replaced tie rod ends and sway bar end links along with an alignment. Oh what joy.

 

Are those rims gloss or matte?

 

Differential oil change at almost 100k miles. Dirty af.

 

Added a console vault. This meant removing the stuff in the console and placing it elsewhere. This required purchasing a glove box organizer. I should have purchased the glove box organizer years ago.

 

All that would have fit in my wife's purse. Guys have use the glove box or console.

 

Ya same boat. I didnt see it until I turned my phone sideways

 

Matte

 

Desert run with the pup

 

Traded the Jeep JK for a better playmate. Wifey is happy, I’m happy. Salt-n-pepa’s here!

 

I like it. Love my console vault. I'm gonna modify your idea and make a platform so the gun is at the top and there is still room for stuff underneath.

 

It's 43 inches. I got it direct from China. Output is good. No Baja, for sure.
I took it apart and filled it with silicone before installing.

 

Got the Birdawg Industries rear view mirror riser bracket in today . Easy Peasy

 

Did some interior detail today also . Little bit of surface rust . Cleaned it up as best I could and coated it with rust prevention T-9 Boeshield . Most of that in the first picture is just dirt .

 

Also going to remove those rocker protectors,they are probably just holding dirt and moisture underneath. I will use some bed liner on the rockers instead .

 

Finally got a chance to install these brand new Bartact seat covers I scored on OfferUp I even got 1/2 a yard of fabric direct from Bartact and had the console cover upholstered.. I really like how it turned out.

 

Went from this:

To This:

 

Did the map light tied to dome mod. Not very difficult and I should have done it months ago.

 

Which one? One wire or two?

 

added a sticker. Pb for paintball