What Have You Done To Your 3rd Gen Today?

Do you have upgraded suspension? I don't see any sag!

 

Yes it works now. Takes about an hour or so to install. I suggest to put as much as you can together before actually installing it. For example, adding all the quick connects and connecting the wires from the wire harness to the button and to the relay and what not.

 

been a busy day, almost hit 40 today here in MN so had to install everything I've had sitting around. Was a busy day but now ready for those storms and upcoming winter camping trip!

Diode SAE Sport Fogs
Meso Side mirror turn signals
RCI Bed rack
Hills Offroad Gear Hog Sty XS Hardshell RTT
Rotopax storage container (can't see)

 

Looks good under that hood.

 

Stock suspension up front. I did an aal on the rear for when I have my RTT mounted. I saw about 1” of sag in the front after the bumper and winch. Not a ton of nosedive when hard on the brakes either. I had more on an xterra I had with just skids. Looking at suspension in the next year. I stayed stock height on the tire so I could keep the same spare.

EDIT: no aftermarket skids yet either

 

Lift is going on tomorrow! Stoked.

Bilstein 5100s on all corners with OME 887 coils. I am 2wd so hopefully going to get 2.5 inches (at least) out of the coils. SPC UCAs as well with a HS AAL for the rear.

Any advice before tackling the install? I'm doing it myself. I've done suspension work before, but nothing recent and not on a Toyota.

My wife hates tacomaworld but I love it Since joining, I have bought lift, tires, wheels, Amazon items from "Amazon Gems" thread (@boogie3478 does a great job on there helping everyone with discounts), and more is to come FOR SURE. Whats next??

 

Seat covers and 4x4.

 

Clazzio seat covers already on
As far as 4x4 goes, I wish I could go back and get 4x4. Unsure as to what I was thinking when getting 2WD

 

Meh... not as big of a need for it in the south unless you’re an avid off-roader that looks for trails. We almost have to have it here.

 

Took off the front air dam, then went wheelin' up in the hills with fellow forum member Round the World.
Good times!

 

Quick ME-SO mod coin tray! wow didn't know it holds $20.00 in coins awesome..

 

I do plan to get one of them here shortly. I had wanted all the neat cameras on my new 2020 one but that would have involved a $5K package. This is a way to get sort of what I wanted.

 

yes sir it was fun!

 

The camera itself, from what I've experienced so far, is surprisingly good quality, better than what I was expecting. The button however, you can tell its after market. It doesn't have the same plastic quality as the OEM buttons. The OEM actually have a texture to them where this button does not. But, once installed its hardly noticeable and still looks nice. The anytime camera I got was from Runnin for Tacos and runs about $165.

 

Lubed my 2 u joints that have zerks.

 

A couple of weeks ago I completed the ARB snorkel install.


It took about 5 hours or so and wasn’t to bad. If interested @Hodakaguy has a great install post. The hardest part for me was removing the inner plastic fender liner.



Its committing cutting a hole into a new truck!



With sharp eyes you can see my blue dual tank ARB air compressor above the fender



Finished with that! And saved $500 of installation labor.

Now working on installing a dual filter water purification system going to be mounted on the rear wall behind the drivers seat. Need it so we don’t get sick drinking on our upcoming big drive starting this May

 

Hauled tile for our various home improvement jobs. Heavy! Truck did fine.

I'm nearly deceased. I kid I kid, it's heavy for sure but since I didn't have help unloading I opened the boxes and carried smaller quantities..........many trips, but my back is good.

 

Thats a BADASS Tonneau cover Bro !!

 

Gave her a wash finally

 

Thanks, my man!