Has anyone actually put 33s on their truck?

FTFY.

 

I just read this thread. I want my 4 minutes, 27.6 seconds back.

 

Ask your parents. They are the reason you read so slowly.

 

Are we talking, true 33’s? Lol

 

Gotta fit these tires at any cost for the gram

 

It goes fine. I've been running them 16k now. They will rub a little with flex while turning. Not enough to be a big deal though on mine.

 

Agree on this. 35x12.50 is ok but they look too wide for the height on 33s.

 

Yea, I'm hoping on the 19' Pro rubbing is minimal to non-existent.

 

Maybe if wheel offset is different but control arms are the same so suspension won't help. Caster forward should fix it.

 

These are the wheel specs.
7Jx16 ET25

Not sure how that compares to what you're running.

I'm also not sure if the stock UCAs allow any castor adjustment.

 

Stock arms don't, but I don't know where mine sits, so yours could be ok. Each one is a little different obviously. I have stock OR rims with the same offset. The rub is pretty light on mine and only rarely. It wouldn't effect my decision to go 255s.

 

I over inflate my 265/70R's to get 33".
I don't like decimals.

 

you should go to the tire manufacture website and see the exact size of their 33x12.50. They are not exactly 33” tall and not 12.50” wide. Just like metric size, they are all a little different. Your comparing apples to apples, but you think your comparing apples to oranges.

 

What lift did you put on a TRD Pro?

 

Now that you've had the revtek lift for a while, how do you like it? Any complaints?

 

Kenda makes a 33x10.5R17 that works well with 4runner TRD wheels. I know of at least 1 member that is running that setup without issue... https://www.tacomaworld.com/threads/new-33”-tire-option-and-might-avoid-cmc.628703/

 

Or do top hat spacers and bump stop spacers