What have you done to your Tacoma today? 1st Gen Edition

You sure a winch will fit with those horns set up that way?

 

...The sun now below the horizon, it was time to find camp. We considered for a moment the possibility of camping here at the Evening Star Mine, but the snow on the ground, and the mountains to the east - which would result in a shady morning - quickly had us searching for lower ground as the orange horizon gleamed before us...

Oh, and there was a bit of an issue with our rear bumper that we dealt with, and an RV that we winched out of a wash. Fun day!

The full story and tons of photos are in: Mojave Redemption #6 - Blue Rocks and a Dozen Cabins





​

 

Aren't the side markers slightly different between the older and newer 1st gens? Maybe you got the wrong ones?

I ordered an aftermarket one for the driver's side after I crushed that fender on a trail, it was Depo brand I believe. Fit great and was only like $15 iirc. Not smoked though

 

that’s what I was thinking. Looks like an 01-04 corner light.

 

One of the best tacomaworld deals I made. It cost me about $100 to rebuild the.

 

Who knows. I’ll cross that bridge when I get there haha. I don’t know if a winch will fit at all with how far back we cut the frame.

 

Yeah it was advertised for 98-00 4WD. Guess they’re just really that cheaply made.

 

Tacoma fenders


https://boise.craigslist.org/pts/d/nampa-tacoma-fenders/7064788237.html

 

Quite a ways from anyone I know.

 

There’s one or two Udahos running a around

 

Didn't do much to my 1st Gen this weekend... more like for my 1st Gen.

Spent about 12 hours cleaning, and re-organizing the garage. Everything, pretty much, has a place. Made room for a spot for a welding cart (bought a welder on Friday) as well as a spot for a press... and still have room to spare, for more bullshit accumulation.

 

I'm pretty sure a winch will fit (minus the horns) as I've seen a few 98-00s with Relentless and a winch.

I think those were the years that there were minor differences in the fenders as well if you had a 2wd model (Prerunner). On some side markers it asked if you have a 2wd or 4wd vehicle. Not sure why those would matter but could be the reason those don't fit as yours was a 2wd

 

I don’t think there was a difference between 4WD and prerunner fenders, but 6 lug and 5 lug

 

Ya I think the sizing is different between the two. Weird thing is tho, fiberglass fenders fit both 5 and 6 lug (from what I've read) so I guess mounting points are similar/same.

 

Mounts the same


bUlGe is different

 

makes sense, thank you for the knowledge

 

https://www.tacomaworld.com/threads/the-frankenstein-build-lt-expo-trail-rig-and-bs.159436/page-51#post-5178734

 

PreRunner/4x4 should be the same, as they have identical bodies and frames. If they advertise it for 2WD only I believe it’s referring to the 5-Lugs.

 

Lols now that's a funny story. confirms for me I can run any glass in the future without difficulty, thanks again

 

Some fresh weather techs with trd off road stickers