Vinyl Installation on Both doors MY19 TRD OR

I added some vinyl today, let me know what you guys think!
there are some imperfections and some wrinkles, but really difficult to see unless you are looking for them!



https://www.youtube.com/watch?v=x5wi3Fotk9s

 

Looks good, I was thinking about doing my tailgate but haven’t convinced myself I could do it properly, may just take it to a shop but where did you source those?

 

I like. Might post in what I’ve done on third gen thread

 

shops are expensive. the whole job costed me $20.

so i figured if i screw up, i can scrap and repeat.

mine is not perfect but it looks good from far . heheh... a full tailgate will be tricky unless the vinyl is 3M 1080 with air channels. that makes it a lot easier.

 

So when does the Coors Light logo go on

 

you really should!! ... or email me.

 

I'm more a guiness guy.. maybe a harp?? .. that might look good. hehe

 

post some photos... im curious what else can be done.

i would like to black out my roof.

 

Those mountains turn blue under 50 deg F

Looks good OP.

 

hehe, good one, they probably make such a color changing vinyl.

I'm not sure what to do next.. i want to see how i could blacken the roof, pillars and little on the hood

 

https://www.tacomaworld.com/threads/trd-offroad-hood-vinyl.530256/

I got the medium length. Don't have it installed yet. The guy does this part time in-between two jobs though so keep that in mind. I think they look the best though.

 

ha, never seen these before. yea ill try to order or make my own

thank u for the link

 

Perhaps a unicorn?

 

On my previous Civic, I wrapped the entire roof and did hood graphics for it (white one has the roof wrap...did the graphics on both though). I used Avery Dennison film and it worked very well. Key is to wrap in temps above 65F and warm the film up with either a hair drier or a paint stripping gun. It is very forgiving and you can work out any wrinkles or issues with it. I have a fairly detailed video of doing the hood graphic on youtube...shows how pliable it is overall.

 

Advice for anyone doing this, use a tablespoon of dawn soap mixed with a full spray bottle of water. It makes for easy movement, adjustment, and peeling for perfection.

Nice decals bro!

 

this came out nicE! .. im thinking to do something similar on taco. but it does not have defined lines like your civic

 

nice vinyl work on your truck! can you post full size photos? .. where did u get the hood decal from?

 

There is one on Minneapolis Craigslist with mountain graphic like that, with Summit Edition under mountains.

 

Sure brother, pics below. I also got a thread of my truck here:
https://www.tacomaworld.com/threads/brought-home-my-2020-tacoma-trd-sport.632729/#post-21721739

Link to graphics below. You can customize with tons of colours. I simply wanted it black and the words to be cut out, not filled, and they did that no charge easily. Great guys to deal with! You can get the full kit like mine without The Punisher skulls from them. I had to order those specially from the Ukraine I think it was. Dirt cheap for a quality vinyl design!
https://importequipment.com/collect...4x4-pro-off-road-or-sport-fits-2016-2017-2018

Thanks for the kind words!

 

Nice work OP. Gives your rig a pretty distinctive look and your DIY approach was perfectly executed.