1st Gen Lunchtable Thread - General Discussion

Question is, would it look better if I did it myself

 

How are you going to wire it to your turn signals? I just bent the tabs on the incandescent bulb socket and soldered wires to it along with heatshrink. I used an EP35 LED flasher relay from NAPA to get rid of the hyperflash.

 

Yeah that's what I was assuming for the line for the transition.
That doesn't look like I thought it would though lol

 

Splice wires together and plug it in

 

You had hyperflash, didn't you?

 

Give shit, eat shit. Go watch your shit rust or something.

I'll just cut the wires to the turn signal plugs. Just a positive and a negative. This style of push in light come with a plug and pigtail.

 

I did

 

That works too. The Feinex T3's only had wire leads, and I didn't want to cut the stock harness so I converted the bulb socket into a plug.

 

Heh, I actually deleted that but the draft must've saved it. Fuckit I'll leave it

 

Did you fix it?

 

Why

 

That's what I was figuring was the good thing about them, finding some not made in China

 

If you can make it look better than this pile of shit, yes.

 

Because it's annoying? Most people fix the hyperflash. It's a 15 minute job with a $10 relay.

 

I grew up in a house where if I was unhappy or upset it was because there was something wrong with me, because my parents obviously couldn't fail me. I carried that for a long time through life and ended up with my ex who was pretty neurotic and insecure and all of her insecurities were placed onto me and it was my fault for having triggered her, obviously. I spent way too long with her trying to change myself to make things work but in the end I was a shell of a person and miserable


It's been years since then and I am still healing and working through that. I do pretty good most of the time but sometimes something strikes a chord and hits me too hard and I take it upon myself even if it's not really on me

 

It just blinks, I dunno, never really worried

 

Guess we have different priorities.

 

Well if you’re just figuring that out now

 

And I didn’t know about the relay deal, I thought you had to wire resistors and shit in and I just didn’t want to put forth the effort.