Colorado Trading Post

Anyone selling a third row vehicle? or is their S/O looking to get rid of theirs?

 

Also any of those soft toppers or best tops still trying to get sold?

 

Lol trying to spend more time wheeling and less time fixing shit

 

Reaching out again. I would really like to find somebody to bob the bed of my 98 tacoma. I am not looking for show ready body work, just a functional increase in departure angle, chop and weld. Can somebody please point me in the right direction of a person or shop to do this? I do not have welding skills or tools.

 

@Sub-Zero @Red Baron @YamaDirtrider

 

I would volunteer myself but I'm already under my own projects

 

Anyone wanna buy a firestik antenna, front diff drop kit, or energy poly steering rack bushings?

 

I’ll grab the antenna if you’re in Denver

 

I am in the springs and might head north this weekend but i will forsure be heading to DIA at the end of feb.

 

I'm headed to Denver tomorrow afternoon if ya'll want to work something out. I can deliver from the Springs

 

You could check out Altitude Offroad in castle rock. They're a Jeep shop, but also work on tacos. They do a lot of custom work, frame chops, welding, etc. I was in there a month or so ago to get some gears installed and was impressed at the work going on. Andrew is the owner, good guy.

 

That is a great deal if you don't mind bad powder coat. Judging by the surroundings, he's swapping it out for some @upTOPoverland stuff.

 

Yeah that's Micahs quicksand taco

 

Is that right by the mead place Honnibrook?

 

yep

 

Looking for a bed camper for an 8 foot bed

 

WTB 2 piece rear driveshaft

1st Gen V6 4wd ext cab manual 1995-2004

$100? 25 "sick build" comments on your insta?

 

Does anyone have a 1.25 Uni-Ball tool for servicing some camburgs for sale or that I could use? Time for some scheduled maintenance. I have an old 1" tool but won't work anymore since I went up in size

 

For Sale!!!!

2017 Offroad/ATV/RTT Trailer----$1500 OBO


CVT ROOF TOP TENT NOT INCLUDED BUT IS NEGOTIABLE. THIS IS TRAILER ONLY.

More pics below

This trailer I have for sale is a homemade/engineered trailer by myself. It was crafted from 2x4x1/8 rectangular tubing with 2x2x1/2 receiver tubing running the entire length of the trailer through the 2x4 rectangular. The trailer was built with strength in mind as it was designed to be towed on 4wheel drive trails. Highway tracking is unrivaled. I’ve towed it to Southern Colorado and the Western slope countless times and even clear into Wyoming @ 80 mph speeds with no trouble of sway or anything alike. If empty it jumps around a bit but nothing concerning. Some of the welds are not the prettiest but I can and will guarantee it will withstand anything thrown at it. I’ve took it hunting, on trails, etc. with no problems. The only mishap I’ve had is this past October when I had the bearings fail on me on the driver side because the nut holding the bearings/races on backed off because of a cotter pin failure which allowed excessive side-to-side movement. Perfect height (~5'11") for Roof top tents with annexes. Hauls ATVs no problem and whatever else you can think of. You may test pull it if you want even. Shoot me an offer, all offers will be entertained. For sale for less than what I have into it. I’m a college student and its parked at home most of the time. So I’d rather it be used than sitting and also a little extra money won’t hurt for this college budget. Once again CVT ROOF TOP TENT NOT INCLUDED BUT IS NEGOTIABLE. THIS IS TRAILER ONLY. Let me know if you want to know more about the tent. More trailer Details below:
-13ft overall length
-Cargo area ~7'x50"
-4 tie down points
-Custom length/built axle with 1/4” square tubing, ~60” wide, same width as most Toyota axles.
-Dexter hubs (no brakes)
-Greaseable (Bearing buddies)
-3500lb leaf springs
-2 rear stabilizer jacks
-3000lb front jack
-All LED clearance/rear lights w/ 4 PIN (will include 7 pin adapter)
-2” coupler connected with grade 8 or 1o 1/2” bolts
-31” tires on Toyota spare wheels (one is 16” and one is 15”, spidertrax wheel spacers included, 3 lugnuts missing because they were stripped when removed and I haven’t replaced them. Some lugs may need to be replace on the spacers but original intentions were more backspaced wheels rather than spacers and Toyota spares)
-1/8” diamond plate floor

Tent:
Purchased May 2015
CVT Mt. Shasta Extended Summit Series
Bright Green
Used ~15-20 nights

PM me if you have anymore questions! Thanks alot!

 

Front Runner kitchen set NEW NEVER USED

$45 ***SOLD PENDING PICKUP TOMORROW AM***