1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Dealer says aftermarket suspension is cause of squeaking [Solved] Firestone Ride-Rite Air Bag Install Question Shocks for a heavily modded 05 lifted Tacoma? (lots mods) 2n gen Lower control arm Adjusting coilovers without removing Bilstein 5100's with Icon Add a leaf

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 663 of 688
  1. Feb 1, 2020 at 8:13 PM
    #13241
    BuildbyBarz

    #13241
    BuildbyBarz Well-Known Member

    Joined:
    Sep 9, 2019
    Member:
    #304798
    Messages:
    266
    Gender:
    Male
    First Name:
    Johnny
    SrQ 941
    Vehicle:
    14 MGM DCSB
    Friends don’t let friends drive stock
    It all good I’m just going to go this route and order this Monday and do it right. Not bad for $20 a piece.

    5C682386-AE84-4AB9-9E64-D7202B4008B3.jpg
     
    BuildbyBarz, Feb 1, 2020
    #13241
  2. Feb 2, 2020 at 6:02 AM
    #13242
    BuildbyBarz

    #13242
    BuildbyBarz Well-Known Member

    Joined:
    Sep 9, 2019
    Member:
    #304798
    Messages:
    266
    Gender:
    Male
    First Name:
    Johnny
    SrQ 941
    Vehicle:
    14 MGM DCSB
    Friends don’t let friends drive stock
    Do anyone know what kind of grease go in there and also is there a gasket for it also? The stock spindle have a gasket connecting between the hub . Thank in advance

    image.jpg
     
    BuildbyBarz, Feb 2, 2020
    #13242
  3. Feb 2, 2020 at 6:14 AM
    #13243
    RexsTaco

    #13243
    RexsTaco Well-Known Member

    Joined:
    Jun 28, 2014
    Member:
    #132893
    Messages:
    1,008
    Gender:
    Male
    First Name:
    Vincent
    San Antonio
    Vehicle:
    06
    Maxtrac spindles Bilstein 5100 adjustable OME 885 coil JBA UCA's Custom leaf pack and Maxtrac extended shocks in the rear. 35x12.5 Atturo Trail blade M/T Moto Metal 18x12 -44 offset wheels.
    RexsTaco, Feb 2, 2020
    #13243
  4. Feb 2, 2020 at 7:11 AM
    #13244
    Alfuh

    #13244
    Alfuh It's pronounced alpha

    Joined:
    Aug 21, 2013
    Member:
    #110878
    Messages:
    6,786
    Gender:
    Male
    First Name:
    Chris
    Bismarck, North Dakota
    Vehicle:
    2006 Prerunner
    I have a few mods
    i dont think anything goes in there honestly, i dont remember putting anything in mine
     
    Alfuh, Feb 2, 2020
    #13244
  5. Feb 2, 2020 at 7:15 AM
    #13245
    RexsTaco

    #13245
    RexsTaco Well-Known Member

    Joined:
    Jun 28, 2014
    Member:
    #132893
    Messages:
    1,008
    Gender:
    Male
    First Name:
    Vincent
    San Antonio
    Vehicle:
    06
    Maxtrac spindles Bilstein 5100 adjustable OME 885 coil JBA UCA's Custom leaf pack and Maxtrac extended shocks in the rear. 35x12.5 Atturo Trail blade M/T Moto Metal 18x12 -44 offset wheels.
    I didnt put anything in mine:bananadead::notsure::notsure::pray: bolt it on and SEND IT:mudding:
     
    RexsTaco, Feb 2, 2020
    #13245
  6. Feb 2, 2020 at 1:56 PM
    #13246
    K-DubTaco

    #13246
    K-DubTaco Well-Known Member

    Joined:
    Nov 18, 2018
    Member:
    #273060
    Messages:
    563
    Gender:
    Male
    First Name:
    Ken
    VB
    Vehicle:
    ‘25 TRD Off Road
    No nothing needs to go in there and there is no gasket. Make sure you torque every bolt on the front end to spec.
     
    K-DubTaco, Feb 2, 2020
    #13246
    Alfuh likes this.
  7. Feb 3, 2020 at 7:13 PM
    #13247
    Jimmy92870

    #13247
    Jimmy92870 Well-Known Member

    Joined:
    Apr 2, 2018
    Member:
    #249239
    Messages:
    798
    Gender:
    Male
    Texas (DFW)
    Vehicle:
    07 DCSB PreRunner
    No gasket, but the dust shield for rotor goes in between there with the stock spindle. But maxtrac says you can discard it since it won't fit with their spindle. Can probably cut it down to size if you really need something in between there.
     
    Jimmy92870, Feb 3, 2020
    #13247
    BuildbyBarz[QUOTED] likes this.
  8. Feb 3, 2020 at 9:33 PM
    #13248
    08BajaBoy

    #13248
    08BajaBoy Well-Known Member

    Joined:
    Oct 3, 2010
    Member:
    #44164
    Messages:
    443
    Gender:
    Male
    First Name:
    Brian
    Southern Cal
    Vehicle:
    08 Rugged Trail PreRunner
    AFE Pro Dry S air filter, Magnaflow muffler, FabTech DirtLogic UCA, FabTech 2.5 remote resi (front) and 2.25 remote resi (rear)
    @Airdog @TheBlueBeast15 I was able to get a couple of brackets printed and test fit them on Saturday. Now just need to machine the real brackets down to size.
     
    08BajaBoy, Feb 3, 2020
    #13248
  9. Feb 5, 2020 at 3:13 PM
    #13249
    RexsTaco

    #13249
    RexsTaco Well-Known Member

    Joined:
    Jun 28, 2014
    Member:
    #132893
    Messages:
    1,008
    Gender:
    Male
    First Name:
    Vincent
    San Antonio
    Vehicle:
    06
    Maxtrac spindles Bilstein 5100 adjustable OME 885 coil JBA UCA's Custom leaf pack and Maxtrac extended shocks in the rear. 35x12.5 Atturo Trail blade M/T Moto Metal 18x12 -44 offset wheels.
    Has anyone had to do the cab mount chop with our Mactracj spindles and 35x12.50? coils and spindles give me a full 6.5 inch lift
    20200205_162850.jpg

    20200205_162850.jpg
     
    RexsTaco, Feb 5, 2020
    #13249
    ChadsPride likes this.
  10. Feb 5, 2020 at 3:18 PM
    #13250
    ChadsPride

    #13250
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    @SpruceTaco never did it but he was right at seven inches up front. What wheels they going on?
     
    ChadsPride, Feb 5, 2020
    #13250
  11. Feb 5, 2020 at 3:24 PM
    #13251
    RexsTaco

    #13251
    RexsTaco Well-Known Member

    Joined:
    Jun 28, 2014
    Member:
    #132893
    Messages:
    1,008
    Gender:
    Male
    First Name:
    Vincent
    San Antonio
    Vehicle:
    06
    Maxtrac spindles Bilstein 5100 adjustable OME 885 coil JBA UCA's Custom leaf pack and Maxtrac extended shocks in the rear. 35x12.5 Atturo Trail blade M/T Moto Metal 18x12 -44 offset wheels.
    American outlaw regulator
    18 X9 6-139.70 10 BKMCBM
     
    RexsTaco, Feb 5, 2020
    #13251
    ChadsPride[QUOTED] likes this.
  12. Feb 5, 2020 at 3:26 PM
    #13252
    ChadsPride

    #13252
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    Only one way to find out I guess :D :drunk:
     
    ChadsPride, Feb 5, 2020
    #13252
    RexsTaco[QUOTED] likes this.
  13. Feb 6, 2020 at 10:31 AM
    #13253
    BuildbyBarz

    #13253
    BuildbyBarz Well-Known Member

    Joined:
    Sep 9, 2019
    Member:
    #304798
    Messages:
    266
    Gender:
    Male
    First Name:
    Johnny
    SrQ 941
    Vehicle:
    14 MGM DCSB
    Friends don’t let friends drive stock
    Anyone brake mine looking like this ? Or is it going along the spindle ?

    6BBFF460-DA48-4CD7-A678-573A17FC8820.jpg
     
    BuildbyBarz, Feb 6, 2020
    #13253
    08BajaBoy and ChadsPride like this.
  14. Feb 6, 2020 at 10:58 AM
    #13254
    ChadsPride

    #13254
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    That's how mine looks
     
    ChadsPride, Feb 6, 2020
    #13254
  15. Feb 6, 2020 at 2:53 PM
    #13255
    BuildbyBarz

    #13255
    BuildbyBarz Well-Known Member

    Joined:
    Sep 9, 2019
    Member:
    #304798
    Messages:
    266
    Gender:
    Male
    First Name:
    Johnny
    SrQ 941
    Vehicle:
    14 MGM DCSB
    Friends don’t let friends drive stock
    Finally finish my lift today. Only rubbing I got was from the front little mud flap on the bumper at full lock in Reverse. Seen like with a full tank of gas My front sit higher than the rear. Maybe I need 1in block to level it out, any idea which block I should go with ? Also probably need an alignment when my steering wheel it center it is pulling to the right. What specs should I do ? Keep it factory spec? 0,0,2.5? Thanks for the help TW couldn’t done it without you guys!!

    72021865-2E2B-4CC0-BA3F-3B18B6361E6A.jpg
     
    BuildbyBarz, Feb 6, 2020
    #13255
    K-DubTaco and ChadsPride like this.
  16. Feb 6, 2020 at 3:52 PM
    #13256
    ChadsPride

    #13256
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    Good job! Looks bad ass!!
     
    ChadsPride, Feb 6, 2020
    #13256
    BuildbyBarz[QUOTED] likes this.
  17. Feb 6, 2020 at 9:27 PM
    #13257
    08BajaBoy

    #13257
    08BajaBoy Well-Known Member

    Joined:
    Oct 3, 2010
    Member:
    #44164
    Messages:
    443
    Gender:
    Male
    First Name:
    Brian
    Southern Cal
    Vehicle:
    08 Rugged Trail PreRunner
    AFE Pro Dry S air filter, Magnaflow muffler, FabTech DirtLogic UCA, FabTech 2.5 remote resi (front) and 2.25 remote resi (rear)
    yep, same here.
     
    08BajaBoy, Feb 6, 2020
    #13257
  18. Feb 7, 2020 at 7:28 AM
    #13258
    TheBlueBeast15

    #13258
    TheBlueBeast15 Well-Known Member

    Joined:
    Apr 28, 2017
    Member:
    #217612
    Messages:
    791
    Gender:
    Male
    First Name:
    Kevin
    SoCal
    Vehicle:
    2015 Blue Ribbon Metallic TRD Off Road double cab short bed
    Sweet thanks for keeping us updated. Make sure to record the process and update with pics when your all finished up. Looking forward to the results.
     
    TheBlueBeast15, Feb 7, 2020
    #13258
    ChadsPride likes this.
  19. Feb 7, 2020 at 7:29 AM
    #13259
    TheBlueBeast15

    #13259
    TheBlueBeast15 Well-Known Member

    Joined:
    Apr 28, 2017
    Member:
    #217612
    Messages:
    791
    Gender:
    Male
    First Name:
    Kevin
    SoCal
    Vehicle:
    2015 Blue Ribbon Metallic TRD Off Road double cab short bed
    Dam that is a beauty.
     
    TheBlueBeast15, Feb 7, 2020
    #13259
    ChadsPride likes this.
  20. Feb 7, 2020 at 7:41 AM
    #13260
    jerBEAR

    #13260
    jerBEAR Well-Known Member

    Joined:
    Mar 24, 2012
    Member:
    #75484
    Messages:
    121
    Gender:
    Male
    387E802B-23A2-4ACC-A120-FEEA183A5B2A.jpg

    4CD9F243-C85C-4387-8978-9A4CAE33A3F2.jpg

    Finally got some field testing done in the desert. Noticeable difference to the front suspension when off road.
     
    jerBEAR, Feb 7, 2020
    #13260
    Xrs-fsho and ChadsPride like this.
Page 663 of 688
To Top