1st Gen Lunchtable Thread - General Discussion

Anyone replaced their drawer slides? picked up a craftsman cabinet for free but all the slides are dead

$20 Liberty D80616C-ZP-W 16" Ball Bearing Drawer Slides

https://www.amazon.com/Liberty-D80616C-ZP-W-16-Inch-Bearing-Drawer/dp/B0064MDQ0E/

 

I.... I don’t understand

 

maybe your insta in signature?

 

dieseltoyz was a service they provided to perform a 1kz swap

 

That is the Aisin A43D transmission. Column shift was standard on 1995-2000 Tacomas. The Aisin A44D was standard thereafter, that was the floor shifter after they discontinued the column shift. If you have a tachometer cluster, look closely at the center. You will see the indentation in the plastic for the PRNDL markings.

 

There is no way this doesn't rub like a motherfucker



CC @cynicalrider @slander @Sub-Zero

 

Oooooh

 

he says he tubbed but it has to rub the fenders/fender flares too. With 35s and 1.75" cut out of the fender all the way around mine is still rubbing

 

Definitely some play - not sure about 1/2" I'd say at least 1/4".

Some pics although they don't say much at all I guess

 

I watched that hopeing he would show how he tubbed the firewall but they spent like 4 seconds on it and 5mins talking about window seals LOL!!

I'm calling bs on wheeling rock trails with it, those stock bumpers would be gone, or at least very mangled up. If it's a fresh build, curious to see a 1yr later vid!

 

Even a brand new one will have a quarter inch or so of play.

 

Looks like the rubber is split and cracked in that first pic.

 

Put the truck in neutral (block the tires) and shake the shaft at the joints

 

Good eye. Didn't even notice that.

 

trans mount - I thought there should be a bit more of a bushing there... there is play but I think that is to be expected. Just not sure how much.

 

You got poly bushings in your leaf springs?

My rear end clunk over bumps ended up being my poly bushing on the passenger leaf main eye. Swapped it with rubber and been silent ever since.

 

That's normal

 

Did you replace them with these OEM rubber bushings in the metal sleeves? Wondering if they need to be pressed in or if you can whack them in with a BFH.





I have a couple of these at home just chilling in my desk brand new.

 

yeah but this just started happening and its f-ing a loud clunk. what I need to do is get a go pro strapped under there to see what is happening. freaking me - thats how loud it is. intermittent as well so its even more frustrating. I do want to go back to the rubber bushings. Should never have replaced them. Those front bushings squeak like crazy. hate em.