1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Uca need replacing??????????

Discussion in 'Suspension' started by Lane Cypert, Oct 29, 2008.

  1. Oct 29, 2008 at 2:30 PM
    #1
    Lane Cypert

    Lane Cypert [OP] Well-Known Member

    Joined:
    Apr 6, 2008
    Member:
    #5786
    Messages:
    326
    Lewisville, Texas
    Vehicle:
    2008 silver prerunner double cab TRD
    I am about to purchase the Toytec 885 3inch lift and was checking to see if I needed to replace the UCAs? I have heard that a lift but stress on the control arms but wanted to know if this is necessary with a 3 inch lift. I don't want to pay extra if I don't need to but also want everything to hold up.
     
  2. Oct 29, 2008 at 2:32 PM
    #2
    SocalMan22

    SocalMan22 Well-Known Member

    Joined:
    Mar 25, 2007
    Member:
    #1146
    Messages:
    8,080
    Gender:
    Male
    First Name:
    Steve-0
    So*Cal
    Vehicle:
    06 PreRunner Dbl Cab
    What Mods!
    Its not but its worth it better travel and put your allignment back in spec.
     
  3. Oct 29, 2008 at 2:35 PM
    #3
    MyToyTaco

    MyToyTaco ╒╪╕

    Joined:
    Sep 23, 2008
    Member:
    #9417
    Messages:
    4,386
    Gender:
    Male
    First Name:
    Nick
    wenatchee, wa
    Vehicle:
    09 DCLB 4x4
    I put on the 885's with 5100s and my stock UCA's rub on the new coils at full droop, and my alignment is out of wack. You can install the lift without them and see if you have any problems..but you should get them.
     
  4. Oct 29, 2008 at 5:57 PM
    #4
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,503
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Get new UCA's. Its an easy install, and makes a world of difference. :)
     
  5. Oct 29, 2008 at 6:25 PM
    #5
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    It's easy - except for the part about getting that 3 foot pin in and out of the shock tower in something like 3 inches of space... That took the longest BY FAR when I installed my lift.
     
  6. Oct 29, 2008 at 6:55 PM
    #6
    Lane Cypert

    Lane Cypert [OP] Well-Known Member

    Joined:
    Apr 6, 2008
    Member:
    #5786
    Messages:
    326
    Lewisville, Texas
    Vehicle:
    2008 silver prerunner double cab TRD
    What is the best place to find good and reasonable UCA's?
     
  7. Oct 29, 2008 at 6:55 PM
    #7
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,503
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    LOL, Its not THAT hard. :eek: I guess it gets easier the more you do it. :D
     
  8. Oct 29, 2008 at 7:03 PM
    #8
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I got Total Chaos UCAs from WheelersOffroad.com.

    Nah, it's just hard working in cramped spaces. And I'm sure it's probably a lot easier if you have the right tools too... :)
     
  9. Oct 29, 2008 at 7:04 PM
    #9
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,503
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    True! :D
     

Products Discussed in

To Top