What Have You Done To Your 3rd Gen Today?

$135 for labor is high compared to the PNW. Mule Expedition Outfitters charged me $100 per hour and they’re based out of West Seattle. Don’t know though what a fair rate is in Santa Barbara though.

They’ve opened a shop in PDX, no sales tax there!

 

It’s also the small things....

 

as long as tire is the same diameter ie 265 75 r 16 vs 245 75 r16 you shouldnt have to.

 

I did the five rim swap because I want to do a five tire rotation. But realize the TPMS sensors can only read four at a time you would have to reprogram when putting on the fifth tire

 

Looks great! Just got them myself. How did you manage to remove the OEM 4x4 knob cover? I couldn’t get it off w/o feeling like I was gonna break something.

 

depends on if you’re increasing the overall wheel/tire diameter. If you’re going to switch to a wider wheel with a taller sidewall, then yes. Width shouldn’t be a factor.

IE an increase in an inch overall wouldn’t be wise as the other side would rotate at different speed.

 

no different than a doughnut place it on the front wheel only and limp your way to a tire shop/home

 

When you have everything else removed. Take a small screwdriver and there are a couple of tabs that hold the outer ring on. Then take a small screwdriver and gently pry from the outside pulling it it off. Look at your new 4x4 ring and you will see the tabs that need to be removed.

 

Spod and ditch lights.

 

Thanks! I really love the feel of the Gen 3 compared to my Gen 1.

 

Not sure what camera you are planning on using but shapeways makes an attachment that pops in the go pro mount for a few on the rexing dash cams. That's what I used and like the way it turned out.

 

Just got done doing mine, seeing yours reminded me I got mine in the mail a few days ago. His YouTube video made the change out a breeze!

 

I believe you. I was just quoting Joe Dirt

 

When your pockets are empty. And even then you will be looking for the next upgrade.

 

Pure beef! I love my BAMF sliders. Definitely saved my ass.

 

I like the look without them. I'm not a fan of tube steps. Sliders, on the other hand...

 

I actually like my OEM steps but they are different. Wider and not so much gap between body. I dont rock crawl so these will do for now.

 

Thanks for the info everyone!

im only going to a 70 from a 65.

 

Some 2020 pro TRD wheels with goodyear wrangler tires

 

If your not a mechanic, but know the difference between philllips and regular screwdriver, are these difficult to do? Not asking for a friend.