Feeler: Shackle Flip Kits

Hey guys,

Is there anyone out there who would be interested in purchasing a set of shackle flip brackets for the 2nd gen tacomas? These kits would raise the rear end about 1/2" and would give you much better articulation when off-roading. These kits will also raise your rear shackles and tuck them up and out of the way to decrease the chances of hanging up on rocks, tree stumps, etc. If you are interested please PM me or Patrick (nofords08) and let us know what you think. If we can get enough people interested we will have all the brackets laser cut and professionally welded by my good friend who is an off-road fabricator. These will be high quality flip kits that I will personally warranty against any defects.

Installation will also be available (AZ members) for an additional cost.

I will post prices if there is enough interest. Should be roughly between $100-$150 per kit.

Let's get a list going...if there's enough people I will setup a GB discount.

Thanks

Tim
Patrick

 

Just a side note, these will noy be built until there are at least 5 orders.

 

ATO makes them for $100 on here already

http://www.tacomaworld.com/forum/armor-tech-offroad/42419-armor-tech-offroad-product-line.html

 

We've been trying to order them from him for over a month now and he doesn't have any available. A few guys I talked to were interested so I thought I would build some for whoever wanted them. Just an idea...

 

5 on top of you and me or 3 more on top of us? bump me and tim want to make this happen

 

gotcha, good luck man. Ive always wanted to do this but I dont know how much longer Ill have my truck so ill have to sit out on this

 

we're really lookng forward to make this happen!

come on guys who doesnt want more flex?

 

Doesn't look like there's very much interest for these. Maybe we will just be building them for ourselves Patrick.

 

get some icons and you will have a even more bad ass truck!

tim, yeah looks like it. but we can give it more time

 

i have been in contact with him as well but he doeesnt have the flip kits anymore but will be in the future.

 

I may be in, how hard is the install?

 

Tim or Patrick,

Hit up Harrelsen from Tucson. He has been wanting one for months but ATO never got back with him. i know he would do one.

 

Hmmm, pain is kinda worth a little more flex

 

Neither of us do, we are waiting to see what the demand would be before we just do them ourselves, we more than likely will then we will do a full write up and have pics and az guys can see them in person

 

Alex, we both have been in contact with ATO and it seems like they might be a while out. but i'll let harrelsen know

 

do you have one from ato?

 

That would be a better route than just posting the idea in theory. Potential buyers can't see what the quality is like.

 

why do you say they are hard to install?

 

it seems pretty simple for the most part, but i will.

 

lol you'll see