Anyone Have Rago Center Console Setup?

I’m looking for anyone with experience using the Rago Center Molle Console and specifically the bridge. do you have any pics? What gear do you have mounted to it and the bridge? If you have devices (like iPad or the like) on the bridge how much vibration do you see while driving? Does the bridge get in the way of cup holders a lot? Is it annoying? Do you not use it much?

Could just be my search terms but I didn’t see any YouTube videos barring install videos of the thing.


Thanks..

 

Same questions here. Did you ever install the system? I've looked at a couple of install videos on You Tube. Maybe since Feb some others have bought and installed and can provide some feedback.

 

Just installed mine about a week ago, super solid thus far albeit don't have much on it at present and has not seen any off road. Clearance height for the cup holders is good albeit my normal water bottle I use is too tall because of the handle on the lip so I put it in the center now

 

Side note one gotcha because I have a '20 now is you have full access but no upright visibility for the lower controls so I haven't gotten used to where the rear slider button is so I have to lower my head down to see where it is at.

 

Thanks for the feedback and pics. I think it looks sharp AF. I have a 2020 also and thought about loss of visibility of the lower controls but I don’t access those much unless it’s to turn off backing assist if I’m towing my boat. I have a Leer cap ordered and once installed won’t likely open the rear slider much if at all. The other mount I’ve been strongly considering is the EE base with Ram track mount.

 

I think this a great option an view as a future investment for poss ham, brake controller go pro etc

 

Ugh. Hard pass.

 

Thinking about getting this. I have a concern hoping someone can help.
Seats in the truck are already close to the center console. I also have wet okole seat covers, making the seats even closer to the center console. When im driving i don't see an issue, but when the wife runs off in the truck she puts the seat all the way up. Will the side brackets fit between the seats and console without ripping the fabric of the seats or seat covers? I dig the idea of the product, don't want to cause an additional problem.
Any feedback would be appreciated.

 

It cuts pretty close when you are putting the seat forward not back