ECT Stealth PRO shift knob

Theoretically it should since mainly the thread is different.

 

Looking at videos, that's what I thought. Can't seem to find much different except for the plastic insert, but I'm not holding one in my hand. Might have to dremel a little bit of the interior bit to run cables, since the MT insert is a bit wider diameter.

 

I’m ready to install my shifter, I don’t see install instructions.

 

There's a video

 

Is there one for the shifter?

if not this one has the disassembly that will get you there: https://www.youtube.com/watch?v=uQI0x6kVODo&feature=emb_title

 

Where is it? I didn’t see it on the install page

 

Yes, I’ve done that install, just didn’t know if there was something specific to connecting to the ect power

 

Yeah it shows him tucking those tiny wires up and under the shifter haha.

 

Idk. I just know he posted one.

 

https://streamable.com/19dwn

 

Post #217
(https://www.tacomaworld.com/threads/ect-stealth-pro-shift-knob.597659/page-11#post-20100277) Meso gives some detail. (Quoted below)

 

thats the one I was trying to post

 

Doesn’t seem like it’s long enough. Do you pull the one to the ect button underneath? Maybe it’s just taped to another wire do it I separate them it would reach?

 

ECT Knob female Wire connector will go under Qi charging area and up where the factor switch was.

 

You pull the Meso harness up to the end that was connected to the ECT button. There should be plenty of length to run the wiring from the shift knob, under the Qi charger and up behind the ECT button. I have the first version, but I wouldn't think Meso would have changed the length of the harness. This quote might help out a bit to see the wiring routing:

 

Think I discovered the issue. Appears I’m missing the harness, only have the pro knob with the short leads attached

 

Ah, that could definitely cause some confusion. You should have received a longer harness that attaches to the pro knob leads and has a connection for the ECT and another connection to use how you wish. Contact Meso with your order number and he'll get you fixed up.

 

Yea, I sent pm. Was thinking it can’t be this difficult. No worries, there will be another day for install. Looked at the pictures posted of the diy kits and saw the harness I figured you all were talking about. Looks like it would be much easier if I had that

 

On the bright side, you should be a pro at taking everything apart and it wont take long at all once you get the harness!