ECT Stealth PRO shift knob

For the button connectors to pass through easier. I think they're JST connectors, but don't quote me.

 

#1090

 

Not the boot exactly. Just the piece on top

 

Got my stealth today . Took me about 1/2 hr to fish the harness through the ECT switch hole. I could not get one small panel loose to remove the climate assembly so went plan B.

All installed (and functioning). Anytime back up camera mod is going on the other switch whenever that harness shows up.

Thanks, @MESO

 

Would you consider doing a write-up on your install (with pics) so others could benefit from your endeavors. I'm considering doing the "Anytime Back up Camera" too and would need some guidance. Thanks in advance.

 

The ABC harness is in the mail so when I get it and do the install I’ll write it up and have some pics. Shouldn't be too much of a problem. I’ll probably have to get the climate assembly out for sure this time along with the head unit. The shift knob end is hooked up.

 

I have good news! The PAC TR7 works for converting the momentary input to on/off toggle

Here's a quick video. Don't mind my terrible setup. I'll do a write up of the wiring and settings later

https://youtu.be/kTZkgOKvRRk

 

Remember the panel to the left of the climate (right of the steering wheel, has a vent) needs to be unclipped by pulling it towards you. I also, for some reason, have to remove the head unit screws to move the bottom bracket out the way of the climate panel. It seems mine over laps the dash but I don’t remember seeing anyone else mention this in the steps or that it was a problem for them

 

What circuit requires a momentary to latching On?

 

I think a lot Of people want to activate aux lights/light bar/etc. so the latched output would trigger the light relay to keep it on.

 

Relays for lights. I'll be using this setup as an external trigger to my SwitchPro 9100 which I can program to do whatever I want, but in this case will be to turn on all my forward facing light bars. It could be applied to anyone who wants to trigger a relay from the shift knob.

 

So another mod? More tabs on the shift knob....maybe dual tabs on each side?

 

Lol something similar to corsair's gaming mouse?

Corsair Scimitar Pro RGB - MMO Gaming Mouse - 16000 DPI Optical Sensor - 12 Programmable Side Buttons - Yellow, Model Number: CH-9304011-NA

https://www.amazon.com/dp/B01MU3DZ2V/ref=cm_sw_r_other_apa_i_vIguEbZ6PEN6Y

 

Also this is coming from someone who has no space left on his SwitchPro


With technically 4 being added this weekend

 

Just 2 on each would be sufficient...

 

@MESO

 

The backlight on the switch pro looks exactly oem blue… or is that the lighting/camera?

when I looked on their site to see the switch stickers included it had some but Also made it sound like more were included not pictured?

 

A forward/backward rocker?

 

Why u laughing dog?
If you see post #1, it's the same tab installed, just split to have 2 tabs to depress.

 

I spent some time trying to get the rgb lights as close as to oem blue as possible. That picture has some extra exposure on it, but they are pretty close and I could probably get it closer if I tried.

For the stickers, what is listed on their site is what you get. Here's my leftovers right now


You can also get vertical stickers if you decide to have the switchpro oriented vertically.