What Have You Done To Your 2nd Gen Tacoma Today?

I heard they went out of business, ddi you have any issues ordering or getting the product?

 

Thank you.

 

Had an alignment done after work today (at work).
Couldn't adjust anything other than the toe because of rusted lower control arm bolts/nuts.
At least the steering wheel is now straighter. Last person to align my truck forgot to lock the steering wheel and messed up the toe, bad.

I have new lower control arms and all the related hardware. I need to install the Energy Suspension bushings into the new arms and install the arms then get it aligned again.

The numbers I'm looking for are:
Toe 0*
Caster*
Camber 2.4* to 3.1*
Are those correct? Found them in another post.
I do have Total Chaos upper control arms.

 

That's where I'm going to mount mine, but to the right and above of the mirror centerline. My mirror is in the "normal" position (I don't have the bracket that raises the mirror).
Just making sure the cable is long enough.

 

With the toe set at 0 the truck will wander. It has to have some toe in to drive straight.

 

May just be a misprint, but you would want your Caster at 2.4-3.1, and you camber at or close to 0*

 

That what I was thinking when I saw the specs.

 

No issue once I was able to order. They ran out of stock and when that happens they disable the web store so people can’t place orders. I had a few emails back and forth asking when the shopping cart would be online and was able to get an order placed. Package arrived in just a few days afterwards. I had a question just yesterday, emailed them and got a reply in a few hours.

 

Not really anything I per say did but I picked my truck up from what I thought was the final garage before trading it in because nobody could figure out why it would drive an hour or so then without warning stall. Turns out it was a bad ECM. Happily paid the $384 and now I have my truck back running awesome. Hopefully that will be the last repair for a while, now it’s back to saving for mods

 

I would appreciate the codes. I am iPhone but I am possibly looking to get an unused android tablet set up in the truck full time so if you have both I would love to get them.

We are looking at getting a travel trailer but just unsure how well these trucks are set up to pull. I’ll take a look at the specs on yours.

 

https://www.tacomaworld.com/threads/one-piece-driveshaft-for-dcsb-4x4.635039/

https://www.tacomaworld.com/threads/tom-woods-drive-shaft.295584/

 

There are several threads on here about towing and campers. There is even the thread that is the tacoma towing bible. Good threads with well rounded info as your requirements will change depending on what you tw and how big it is.

here's one I guess i cleared the others from my watched list but there is the show what yu tow and other threads

https://www.tacomaworld.com/threads...ilers-whatcha-got.596908/page-6#post-22761691

 

Had a nice morning of almost 30 degrees so I gave it a good wurshing and got the salt off.

 

Brrrrr how did you keep the water from freezing on the truck?

 

finally turned over a 100k.

 

you've got skills son. Ever want to roll through Indy and consult on a project or two, let me know!

 

What's that dohicky in the bottom middle of your speedometer?

 

is there a instruction for 2nd gen for a front back up camera switch i really want to install a front camera?

 

Looks like a mic probably for handsfree on an aftermarket head unit

 

Armor