2.5 lift need alignment advice

I’m a newbie to the Tacoma World, previously in the 4Runner forum. I just installed 5100s front and back with OME 2888 springs, and Icon AAL on the rear. I didn’t do much research on the alignment before I got it done. They said the Camber is maxed out but it still seems too positive for me.









I've read to push caster out to have camber zero out but I’m not sure how it works. Thank you in advance

 

Sounds like you might need control arms

 

This. There is alot more to lifting these trucks than just installing a set of coilovers. Good luck with your truck and welcome to TW.

 

Agreed. I added Dobinson upper arms with my lift which added plenty of adjustability.

 

Welcome!! Camber is ok. Yes 0 would be best. Toe is fine. Imo the truck will drive better with the caster set at the high end. Personally I run 4* of caster. Probably won’t get that with the factory uca.

 

Upper control arms is your best option.

 

Thank you, they are trying to max out the caster to try to zero out camber in the meantime.

I’ll have to look into UCAs in the future.

Thank you guys!

 

Looks good!