Resume

New sport mt. On cruise, when push in clutch to change gear, hit resume , it resumes but adds 1 mph also?
Any body have this problem?

 

.

 

Welcome to the forum

I have not encountered this issue. I used cruise control the other night with zero problems to post about.

 

Read Owners manual.

 

If you are using the radar/dynamic cruise you don’t need to hit resume it will resume automatically when you release the clutch. That might be why it’s adding 1 mph.

 

Of COURSE! This radar thing is new to me. I will give it a shot. Thanks a million!

 

You’re so helpful!

 

That is very useful, the truck has a bunch of technology in it that is all outlined in the owners manual. It's the best place to learn about our trucks.

 

I would personally agree with you, but I wasn’t the one kindly asking for help.

 

Gents,
I actually did look at the dash book, but assumed it was about auto not mt -- This forum is a great resource for a new Taco owner -- Again thanks a bunch!

 

I was overwhelmed with all the tech stuff too. Its alot all at once. If you wish to use old school cruise control you can just push and hold the cruise control button untill the dash light switches lights. Then radar cruise will be deactivated and you can slow down and speed up toggling up and down like older models

 

Show us a picture of the nice new truck!