Fog light screw info?

Adding fog lights to my SR and noticed I don't have the screw. I seen somewhere that all Tacomas should have the screw. But either im blind or mine doesn't. I searched the part number but it doesn't come up with any hard dimensions for it. From the look of it, it doesn't seem to be anything special. I would like to think I can stop by Lowes or Home depot to grab two instead of order 2 screws online.

 

its a short stubby phillips head with a wood twist profile. I dont think its anything special. you probably have something laying around your house that will work if you keep all the spare parts from projects.

looks like this just with theads going up the whole screw and a tad shorter.
https://www.accu.co.uk/en/torx-mush...jpAxtZxgH1-NS9n1KGb7_wbJ62xyzmeBoCz8wQAvD_BwE

take a drill bit and probe the hole to get the shaft thickness

 

I installed fogs on my sr, the hardest part was putting the screw in because it screws in from the inside.

 

I think there are 2 holes for screws, but only the inside one for each fog light has it.

 

Im looking for info on the screw. I understand the install part.

 

It's just like a half inch wood screw.

 

So there should be a screw somewhere in that area already there, even though I have a SR?

 

No clue

 

Thanks, I'll try and see the size. Im trying to find the exact size so i don't go to big and split the plastic

 

Ah ok haha

 

Go fairly thin, sorry I'm not more help with the exact size.

 

No worries, It'll all work out in the end im sure

 

My 2019 SR did not have screws also. I have a million screws around this house and I need a million and two. I will use nut and bolt with washers to secure the fog lights. Don't want to risk cracking the plastic with a wood type screw.

 

Location:



Screw info:
https://www.toyotapartsdeal.com/oem/toyota~screw~pan~tapping~90167-50063.html

 

I went to oreillys and used a license plate screw in each side.

 

Thanks finally installed and after a trip to get some bolts I realized I already had some that I could not find earlier. Spent the last hour organizing nuts and bolts.

 

Super late to the party, but wanted to add some info anyway...
Installation screws x2: 90167-50063
Thanks to a thread by @Nitori https://www.tacomaworld.com/threads/nitoris-oem-sr-foglight-mod.451495/

 

Only one on SR

 

I think what people are saying/implying is to just get a screw that works. If you know where it go's and cant find one already there, then maybe you dont have them and need to go from there.

 

Mine only has one