Everything MOLLE BS

I got mine in 6 months ago, can't wait to take it to Alaska...Take your seats out, so much room!

 

It's dry but a full cure takes 4 days. Guess it's going to sit there for a couple more days.

 

Installed this weekend from GB #19. After painting black and disliking it, I sanded lightly and while repriming, it dawned on me the flat grey primer is the perfect color if you have interior grey. Other things in case it helps:
- $63 for Noico black from Amazon double layered
- $6 ($10 with 40% coupon) for 2mm foam sheet from Joann for behind panel to hide the ugly
- $2 for thick felt sheets from Walmart for corners where seatback impacts/rests against top corner edges
- $6 for 6" bed risers from Walmart. The wedge perfect into corners as a platform stand
- Cut, joined, radiused, etc misc floorboards from garage as extended platform when needed for my dogs. Will wrap in carpet.
- Considering a black weather strip along top to give it a finished look against the window

 

These look nice.
sub'd

 

Quick update. Found basic essentially speaker box carpet at Home Depot for $2.81 per linear foot of 6ft wide. Only needed to buy 2ft with plenty leftover. Now just need to set up pouches after letting the paint fully cure a few days. Anybody on the fence: do it! Thanks Doc for organizing and keeping the group buy going!!!

 

New member, but I'd like to get in on 20 for a DC w/ power window.

 

How can I get my hands on one of these for the 60 side of a 17 Tacoma? I’m out in Hawaii.

 

I’d like one for a 2018 double cab power window please.

 

Ordered!

 

Test fit tonight. Going to need longer bolts to account for the extra thickness added by the layers of soundproofing.

Also anything that I want to install where the vent is needs to be mostly permanent and on before the panel goes in.

 

Can you put me on the list for a 2020 Access cab.
Thanks

 

Looking for Molle storage for behind seats of 2017 Taco Crew Cab. Price?

 

See first post, bud

 

Speaking of the first post, it probably should be updated to include the noting the hardware needed to correctly reinstall the rear seat latches safely.

https://www.belmetric.com/8x125-coa...-hex-bolt-black-extra-strong-129-p-12821.html

 

Were your stock bolts not long enough?

 

Correct. This is also mentioned here and there in this thread and in the video you linked.

 

I think the issue is when sound deadening material is placed underneath, depending on the type and thickness. I did not have the issue of needing longer bolts on my install.

 

I could go double check again, but I actually removed the factory pad and the sound deadening I added was not in contact areas.

 

This is definitely not a common complaint, but I will still update the OP for future potential issues.

 

Can't wait to get mine. I'm definitely going to add sound deadening material. Might do the whole interior while I'm at it. Don't forget to update the list @docloco